Closing the Loop… printing my photographs in house…

Introduction

my first at home print
Zenfolio Desktop

I’ve heard it said many times that the process of photography is not completed until you hold a printed image in your hands. That statement reminds me how exciting it was, decades ago, in my 8th grade photography class to pull a print from the developer bath and to witness what I’d created! It was all very satisfying.

Nowadays most of us “develop” our prints on a computer using a software program like Adobe Lightroom to fine tune the image. Then if you are like me, you’d show them off to your family on a computer screen and then perhaps post them on various forms of social media, hoping for positive feedback. Finally to preserve the best photographs in a safe place you would upload them to a cloud server, which in my case is Zenfolio. There the photographs would sit in the dark until you decided, for whatever reason, to retrieve them, which nowadays is a major PITA because Zenfolio archives the images and it takes a minor act of Congress to view or retrieve them. In other words it is very tedious waiting hours for an archived group of photos to be retrieved!

Photo album

Before the days that I uploaded to the cloud, I would send images out for print processing. To keep costs reasonable, I would have standard 3X5″ prints made and mount them into a photo album. It wasn’t long before the albums accumulated in number and started taking up considerable space in my home. Further, the smallish prints were not very satisfying to look at and finally I had little control over the quality of the print process. Most of the time, the prints were good enough, but not always. At any rate, the aforementioned Zenfolio cloud account eliminated most print charges and saved space both on my computer and in my home, but at the cost of the images disappearing into the cloud.

Lighthouse on the coast of Maine hanging on my wall

Not all my photographs disappeared into the cloud. There are some that adorn the walls of my home like the exquisitely framed shot of a Maine Lighthouse that I took on a vacation in the northeast. Printed and framed images are truly special because they evoke important memories and are typically the best I can do with a camera. Large prints are expensive to produce and professional framing costs are quite prohibitive, but I think it’s worth it for those rare photos. Recently I had four smallish North Carolina wildflower images framed for our home and they cost close to $400 for the set! These recently framed images can be seen below hanging in our sun porch.

North Carolina wildflowers printed, framed and hung in my home

Before moving on to the main subject of printing in more detail, I would be remiss not to mention another way in which I’ve preserved some of my best photographic projects, and that would be the production of printed photo books. Below, you can see three books I’ve created with the help of Apple. Two of the books cataloged my extensive work with woodlands and tall grass prairies wildflowers, and the other documented my son Parker’s successful Eagle project. The books are a marvelous way to professionally depict photographic images in a story-like format. It is a lot of work putting one together and moderately expensive to produce, but they’re a fantastic way to show off your work!.

Apple bound photo books

Mama Don’t Take My Kodachrome Away

This summer I re-invested myself in my photography hobby with the acquisition of a Leica Q3. I take it almost everywhere I go because it is so portable and can make extraordinary photographs, plus I love taking pictures. As in the past, I started out posting them in social media and finally stored them in the cloud.

Then, I started to wonder how I could raise my game to a higher level. How could I push my photography a step further than I’d ever done before? It then occurred to me that wouldn’t it be a hoot to professionally print my own images in-house on a printer that I owned! And so I began the process of researching and acquiring a photographic printer.


Acquiring a Professional Printer

Canon ProGraf Pro-300

Well, I started googling around for “best color photographic printers” and Canon kept showing up in the upper register of the lists. There were Epson’s too, but when I considered that Canon also manufactures state-of-the-art cameras, I gave them the edge. Further, the Canon ProGraf 300 hit a sweet spot in terms of weight and footprint.

If you intend to follow the path that I was on, be aware that photographic printers are rather large devices. They are considerably bigger than typical home document printers primarily because device size is required to make larger prints. So as you would expect, the larger the output print size capability, the larger the required printer’s footprint and corresponding weight. Also affecting device weight is the amount of ink the printer will store. For example, the Canon ProGraf Pro-1000, which uses “ink tanks” will print up to a 17″ X 22″ print, but the device is almost 29 inches wide and weighs just over 71 pounds. There is no place in my home where the Pro-1000 would fit and even if there was, it’s far too heavy for me to move around!

An A3 sized 13 X 19 inch print

In the end, I ordered a Canon ProGraf Pro-300 after watching multitudes of YouTube reviews and tutorials. It had a slightly smaller footprint than the Pro-1000 and weighed half as much, but only makes a print as large as 13 X 19″ and uses smaller ink storage cartridges, which is probably good enough for my purposes. In fact, most of the printing I do for my collection of keepsake images are 8 X 10″ copies which the printer handles quite easily. Occasionally as seen above, I do make large prints too. Further, the Pro-300 is a newer design than the Pro-1000 and is said to recreate blacks in a print more effectively.


The Process of Producing a Photographic Print

Select an image and fine tune it to meet your technical and artistic sensibilities. Below you can see my old fraternity brother Captain Mike, retired USN, where his assignment was as a captain on an aircraft carrier. His image was post-processed in Adobe Lightroom and Nik Silver Efex and it is now ready to be printed.

Image prepared on my laptop

Days earlier, when the ProGraf Pro-300 arrived, I unboxed it and went through a relatively easy set-up which involved installing the printer head and ink cartridges into the printer, as well as installing printer drivers onto my MacBook Pro. Further, I had to get the printer on my home network so that it would receive signal from my laptop. Finally, I installed onto my laptop a Lightroom Plug-in called Canon Professional Print and Layout, which could be accessed directly from Lightroom and/or Photoshop as well as run independently as a stand alone application. It is also possible to print directly from Lightroom using Adobe’s internal print program, but my analysis indicated that the Canon plug-in was easier and more effective to use. Below, you can see the pull-down Lightroom menu that leads directly to the Canon plug-in.

Lightroom pull down menu to access Canon printer plug-in

Now you can see the image of Captain Mike laid into the Canon printer layout work space. It is here that a variety of final fine tuning settings can be made. For example, the size of margins can be varied. More importantly, color adjustments, brightness and contrast can be altered too. The setting sliders are on the right side of the workspace.

Canon print layout software work space

Matching the Print to the Computer Screen

My experience is that color adjustments are best made in Lightroom and not in the Canon Layout software. Thus far, I’ve had pretty good outcomes matching color in Lightroom on screen with the final print because Lightroom has a lot more nuanced sliders to make alterations. This is no mean feat because I’m dealing with two different color theories existing between the computer and the printer. The computer screen creates hues by blending colored lights similar to stage lighting with the primary colors being red, green and blue. On the other hand, when we see a printed image we’re seeing reflected light with primary colors being cyan, magenta and yellow. In other words, the computer is transmitting mixed light and the printed image is selectively absorbing and reflecting light. To deal with these opposing color theories, It is not unusual for photographers to invest in color calibration tools to ensure best color matching between screen and print. Fortunately for me, MacBooks come from the factory with pretty accurate color calibration which helps go a long way to produce a reasonably well matched print.

On the other hand, I’ve had to master adjusting the brightness of the screen image in the Canon software to match the brightness of the final print. Depending upon my observation of the image on the screen I may adjust it to the bright side by 15 to 25 points on the slider scale of 100 to get a good match and am getting pretty accurate results.

Below you can see the image delivered from the Pro-300. It looks pretty good!


Other Considerations During Printing

Printer ink volume indicator

There are two consumables required to operate the Canon Pro-300. They are ink and paper. The ink is visibly consumed when the printer operates. This is known because the printer does a good job of keeping me aware of dwindling ink levels. This is important as it’s really bad form to run the device with a dry ink cartridge because the printer head can be damaged. Damaging the printer head should be an avoidable failure with just a little care in keeping up with ink volumes. In order to maximize the printer’s color gamut, the device is engineered to run 10 different ink colors. My experience indicates that the inks exhaust at varying rates depending upon what the prints call for. Thus far the photo-black and the gray cartridges seem to expire more quickly, so I keep some extra spares available.

Ink cartridges in printer head assembly

Thus far I’ve ordered my ink directly from the online Canon site. It is very easy and quick to change out an ink cartridge. You can purchase a complete set of all the required colors or buy them independently. I’ve done it both ways because I want some extra black and gray available. I considered making the purchase through Amazon out of habit; however, all the ink that was available was from aftermarket suppliers, and everything I’ve read suggests staying away from non-Canon inks. It’s pennywise and pound poor as the non-Canon inks appear not to perform as well according to general user experience, particularly from a color accuracy standpoint.

Canon printer papers

There are multiple paper sizes and finish types available for photographic printers. Further, there are multiple companies producing varying qualities of paper. The choices can be overwhelming, so in response, as I learn the ropes of photo printing, I’ve started with a basic Canon Pro Luster paper which is a nice neutral cross between a matte and low gloss finish. I’ve been very satisfied with the print outcomes and am not in a huge hurry to switch to other finishes yet; however, with a recent purchase of fresh inks, Canon threw in a sample pack of 4 different types of paper and I am looking forward to experimentation.


After Print Action

Shortly after I started printing photographs, I realized I was going to need some method for trimming the output. For example, I was printing 8 X 10″ photographs on 8.5 X 11″ paper and needed some way for neatly trimming off the excess margins. My old frat brother John Gellman advised me that the best trimmer for photographs was the Rotatrim Pro and insisted that I get the 24 inch model. He said “it’s the best and accept no substitute!” So, I followed his instructions. The Rotatrim was expensive but it is an extremely precise tool. Since it is self sharpening, it should require very little maintenance too, which I like. Below you can see the finished Captain Mike photograph after trimming:

Finished print image

Storing Prints

Photos stored in a drawer… bad form!

It’s very exciting seeing one of your images delivered by the printer. The question now is what do you do with the print? I’ve given some away to neighbors if I’ve photographed them, or stuck some on the refrigerator with a magnet, and framed one for the wall in my home. Too often, I found myself accumulating prints and stuffing them in a drawer to keep them safe which was not particularly satisfying!

So, after giving it some thought, I began a search for a portfolio type contrivance to hold the prints that I thought represented the best of my work. After scrambling around in Amazon, I found a line of photograph oriented portfolios by Itoya sized for 8.5 X 11″ prints. It will hold as many as 100 prints, which I thought would be a perfect way to archive images in an easy to show format. If I chose to archive the larger 13 X 19″ prints that the Canon is capable of producing, Itoya makes a portfolio large enough to hold them!

Itoya portfolio binder

Completing the printer set-up

When I first purchased the Canon printer, I knew where I wanted to place it. We have a location in our home called the resource room, where my guitars are stored, as well as Annette’s writing and weaving space. There’s also a day bed in this ” third bedroom” for a guest if our second bedroom is occupied. At any rate, spare space in our home has its limits, but I determined that the printer would fit perfectly at the foot end of the day bed and located it there. The printer rested on the carpet floor and I wanted to get it onto a platform. The problem in finding a platform is that photographic printers are much larger than home document ones. In other words, the preponderance of home printer stands available were too small for the Canon. Eventually, I found a shelving company that offered a nice platform that the printer would fit on and now the set-up is complete.


Final Thoughts

If you subscribe to the notion that the photographic process is not complete until you hold a tangible print in your hands, then acquiring a printer that can produce a quality image may be for you. There is an upfront capital cost to set up a printer, but I’ve spent more money on a camera lens. In my judgement the cost of ink and paper are not out of line for a serious avocation or hobby. Mastering the printing process is fun, but you should enjoy working with a somewhat fiddly technology before you venture down this path.

Finished product for a wall in my home

A Memoir: My Personal Journey with Cameras, As Best I Recollect…

For my own amusement I am writing a memoir about my cameras and my associated photography since I was a child. You’re welcome to join my journey. As you’ll see I’ve had a lifelong fascination with photography and cameras.

Brownie Starlmite Camera

The first camera I recollect owning was a birthday gift from my parents when I was around 10 or 11 years old or so. Sadly none of the photographs taken with this camera are in my possession. I don’t think I shot a lot of images with it, primarily because film and processing was expensive and my family did not have the money to indulge large scale use of the camera. On the other hand, I do remember two very clear instances of using the camera.

My junior high school in Gastonia, NC routinely took all 8th graders on a day long field trip to Raleigh, Durham and Chapel Hill, NC. I brought the camera long and shot a roll or two. Mostly, I shot the sites along the way like the NC Penitentiary where I saw the gas chamber used to execute the condemned, the old Dorton Arena, which was considered a regional architectural wonder, and finally the campus of the University of North Carolina. I thought I did a pretty good job documenting the trip, but when I showed the developed photos to my mother, she was apoplectic because none of the photos included my trip companions. She really dressed me down for this failure, and it actually affected my photography for a long time afterwards. Ahhhh, the damage that parents can do to their children… I call it my mom’s curse and I labored under it for a long, long time.

Typical school darkroom
Photo by Don O’Brien via Wikimedia Commons

In the 8th grade, at my Junior High School, a photography class was offered by the shop teacher, Mr. Cloninger. The focus of the class was the technology of film development and processing in the school’s iconic basement darkroom, which, as they all were, was buried near the Balrog’s lair down in the bowels of the earth. For class, we were all instructed to purchase film developer, fixer and photo paper. My parents were good enough to fund the experience.

I had no fancy film developer device. Instead in the pitch dark of my home’s bathroom, with towels stuffed under the door, and using two cake pans for the chemicals, I developed the film taken from the Brownie with the help of my Mom timing the process, as I sloshed the film back and forth, first in the chemical developer and then finally the fixer. It was pretty rudimentary but actually worked quite well. I’d then take the film to the dark room and print the images. Sadly, none of those photos exist today, but the class created lifetime memories! I have no memory of what happened to that camera.


Kodak Instamatic

I recollect being gifted with a Kodak Instamatic camera in my early teens from my parents. Back in those days of the early/mid 1960’s Kodak heavily advertised their simple Instamatic cameras. They were relatively inexpensive mass produced devices that were perfect for producing family memories. The film was encased in a hard plastic container that made loading into the camera very easy with little chance of accidentally exposing it. I remember thinking that if I wanted to develop the film, getting into that plastic enclosure would be very difficult. The film was a very small format 110 size which offered the user limited image size and resolution but they were great for photo albums. I do not think I used this camera very often except on family outings and have no examples of the images taken, though I can remember some of them like the ones taken on a family trip to Tweetsie Railroad in the North Carolina mountains. Again, I think the cost of purchasing and developing the film was a prohibitive factor.


Photo of me and Brad Silver, Frat President

After Junior High School, I had little to do with cameras or photography, and this dwell period lasted until I finished undergraduate school. It is important to note that one of my fraternity brothers, John Gellman, was as avid photographer and happened to be on staff of the Daily Tar Heel at the University of North Carolina. He could be seen everywhere with a Nikon 35mm camera around his neck. The photo to the right is one he took of me in the backyard of our frat house in Chapel Hill. In short, I was inspired by John’s photography and thought I would like to be a 35mm shooter some time in the future.

I got my first taste of actual 35mm film photography in graduate school at the Institute of Textile Technology (1978), where there was a Canon manual 35mm camera available on loan. I shot a couple of roles of film and was, in short, quite enthused. The camera had a normal 50mm lens and an onboard, in camera TTL (through the lens) light meter. It was up to the shooter to select f/stop, shutter speed and film ASA(light sensitivity) to get the proper exposure. After that experience, I committed to purchasing a 35mm film camera when I could afford one. I really liked the feeling of peering into the view finder and capturing the image with a click of the shutter button.


Canon AE-1

After graduate school, I took my first post as a technical manager in Tallassee, Alabama at a very large textile manufacturing complex. It was during my time in Alabama that I purchased my first 35mm Single Lens Reflex (SLR) camera. It was the popular Canon AE-1.

For its time, the AE-1 was a breakthrough camera. Because of advanced design and manufacturing techniques, the camera was reasonably affordable for the technology it had to offer the user. It was one of the first SLR’s that had through the lens exposure metering which allowed precise exposure of the subject by automatically adjusting the aperture. This approach was referred to as shutter-speed priority. In other words, the user controlled shutter speed and the aperture automatically stopped down to the appropriate f/stop as determined by the TTL exposure meter. The basic out of the box AE-1 came with a relatively fast f/1.8, 50mm lens. Later, I purchased a Tokina 105mm lens to serve as a modest telephoto lens.

Still suffering under my mother’s curse, the preponderance of images I shot with the AE-1 were family photographs. I don’t have many of the photos from that era as they got lost in the shuffle of life. The image below is a great example of the AE-1’s ability. It must have been taken by my wife, at the time, after I set the camera up for her. It demonstrates how the camera was used to document family activity. It’s me in my younger days with my first born, Jessica:

Jessica and her dad…

With the AE-1, I shot a lot of 400 ASA film, which was a fast (good in lower light) and popular film for the time, but I eventually gravitated to 100 ASA because it was less grainy. I think I also experimented with a few rolls of slide film to save some cost in film processing, but found it unsatisfying squinting through a viewer to see the images. Though I enjoyed photography, I was irked at the cost of film processing and lack of control over the final product, so it limited how much experimentation I would do. In a single 24 picture roll of film, I would typically have a handful of keepers, so film photography was not a very shooter and cost efficient enterprise. For more process control, I considered purchasing a dark room set-up but ruled that out because I did not have the physical space and I preferred color photography. A color dark room was completely out of the question because of its increased complexity and cost.

The AE-1 was a fun camera to use and very popular, as evidenced by the advertisement shown above. I used the camera for several years before becoming distracted by changing jobs and later beginning work on a doctorate at the University of Virginia.


Minolta SLR with Autofocus

It was in the late 1980’s that I was on a business trip to New Orleans, where I was attending the annual meeting of the Southern Association of Colleges and Schools, which accredited the institution where I was dean of the graduate program. Between sessions there was plenty of time to walk around the commercial district. I was astonished by the number of camera shops on the main drag. In retrospect, I suspect that many of those stores were owned by a single company. Nevertheless, I visited several of the shops and in doing so, I became aware of technical advances in consumer SLR cameras that had been made since I’d purchased the Canon AE-1. Most notably, the Minolta SLR that I scrutinized in the store had a state-of-the-art autofocus system, a motor-assisted zoom barrel, and selectable aperture or shutter speed priority. Further, there was a program mode where the camera could make all the decisions itself, which was great if you were feeling lazy while snapping off some quick shots. Motivated by the new technology, I purchased a Minolta in New Orleans and used it through the 1990’s. It was a fine camera to use during the waning days of film photography. As with the Canon AE-1, most of my film photographs were for family documentation. Similar to the AE_1, prohibiting factors were film and processing costs, and the lack of control over the final product since outside processors still developed and printed the film.

Below, you can see a scan of a shot taken with my Minolta of Nettie and four of our five kids on our honeymoon trip to Lake Superior,

Madeline, Mary, Nettie, Ben and Sally at Lake Superior

Basic early digital point and shoot

When I took a post at the University of Northern Iowa as a Professor of Textiles and Apparel in 1999, one of my first tasks, outside of teaching and research, was to support the annual student design show. I was loaned a small digital point and shoot camera to photograph the show. No one had ever photographed the show before me. The camera was about the size of a cassette tape, easy to use, was magical in how quickly it rendered an image to be seen on its rear LCD screen after the shot. On the other hand, the camera suffered from serious shutter lag, which was very disconcerting at first because I never experienced that phenomenon. Shutter lag meant the camera did not actually take the shot for some time after pressing the shutter, so that what you saw produced on the LCD panel was different from what you saw when you activated the shutter. Latter digital cameras removed the lag. Despite the shutter lag, I was beguiled by this new technology.

Kodak DC265

Shortly thereafter, I prevailed upon my department to order a digital camera for our use, which ended up being occupied primarily by me, mostly because I was the only who cared about photography. It was an early generation 2.1 megapixel Kodak DC265 digital range finder. I used it extensively for several years to document activity in my department and also to support my field research, which at the time was to study Civil War Reenacting, its meaning, and the relationship of dress and appearance to the activity.

You can see below a photograph of a national reenactment that I shot with the Kodak in the early 2000’s. The image was subsequently published in a monthly Civil War Reenactment journal, called the Camp Chase Gazette. This version was post processed to look like a painting.

At the Battle of Chicamauga National Reenactment

The Kodak digital camera was a true workhorse out in the field. It was exceptionally durable and its NiCad batteries held charge long enough to make it through a multi-day reenactment. It knocked out 8×10 inch images without difficulty, though that was about its maximum resolution limit, and the color rendering was reasonably accurate. Digital photo post-processing was pretty rudimentary in those days; however, I did manage to isolate my image from one photograph, and then cut and paste it onto a Matthew Brady original of captured Confederates at Gettysburg. I did this for a presentation at a professional meeting. See below:

Dr. Strauss (right) captured at Gettysburg

I dabbled around with my university’s digital cameras for several years, including a later upgrade to the Kodak. My department purchased a 5.1 megapixel, Nikon Coolpix E5000. It was a step up from the Kodak in that it had a host of more advanced features and was thus considered a prosumer camera. I had access to the camera from around 2003 to 2005. It was used to document department activities, and I shot some personal photos too like the one below that was taken on the shore of Lake Superior in Wisconsin:

Young Parker on the shore of Lake Superior at Madeline Island, Wisconsin

Nikon D70

Around the spring of 2005, I stumbled upon a news article reviewing the new Nikon D70s. I was astonished because I had no idea that SLR’s were being manufactured that replaced film with digital sensors. They were referred to as DSLR’s. Further, my wife and I were going to spend 5 weeks in Lyon, France with our family teaching textile history at a museum and I wanted to document the trip with photography. I decided it was time to jump in and get a new camera of my own. For quite some time I was very interested in acquiring a Nikon camera, as that’s what my frat brother John Gellman shot when we were both at the University of North Carolina.

So, on a visit to Iowa City in May 2005 to see our daughter who was in school at the University of Iowa, I stopped by the local camera shop in the downtown area. The shop did not have the highly demanded D70s, but had an older stock D70, and I jumped all over it. Most exciting was that this was a real SLR camera but with a digital sensor replacing film! I suspect that the camera shop charged me top dollar, but I was delighted to leave town with the Nikon in my possession. The kit contained an 18-70mm zoom autofocus lens with a 6.1 megapixel sensor, which was larger in comparison to the university point and shoots I was using. The sensor was DX sized, which meant it was smaller than the size of a piece of 35mm film; nevertheless, it was a very capable “relatively” affordable consumer DSLR and I loved it the moment I heard the shutter click the first time.

Apple’s Post-Processing Software

Unlike the digital point and shoots, where the photos unloaded from the camera were pretty much ready to go, the D70 RAW files were anything but ready. I was shocked to see how dull and lifeless they looked like until they were post-processed on my computer to bring out the brilliance of the camera’s capture. To get the best post processing that I could at the time, I adopted Apple’s Aperture software, which I used religiously through every update, until Apple dropped the photo post-processing business. I later adopted, somewhat reluctantly, Adobe Lightroom and use it still today as I write.

I also found myself shaking off my mother’s curse and started making images for art’s sake. I felt liberated by the ability to instantly see the results of my photography and to subsequently fine tune the final product using Apple Aperture. Shortly after purchasing the D70, I took off for Lyon, France with the Nikon as well as a MacBook, and had a wonderful time using the D70 every day. Below you can see a depth of field perspective shot that I made while visiting a French Chateau. I was inspired by a similar shot I’d seen in my thumbed through classic Handbook of Photography!

At a French Chateau outside Lyon

Inspired too by a photograph of Coco Chanel on a scooter that I’d seen in my wife’s office, I created a derivative shot of our son Parker with his sister Madeline.

On Rue de la RĂ©publique in Lyon
Coco Chanel on scooter

Nikon D200

A couple of years after owning the D70, I became interested in the Nikon D200 as a step-up camera. It was an interesting time in DSLR development with companies rapidly developing advancements in sensor size, sensor light sensitivity, camera build and operating features. In short, it was a golden age of camera development. Camera companies like Nikon and Canon put out a lot of marketing pressure to make photographers feel left behind if they did not get on board with the latest models! I was not immune to these tactics.

What attracted me about the D200 was its pro-build. Unlike the D70, the body was not plastic but instead was built upon a magnesium skeleton. There were control features the D200 possessed like the ability to do back-button focusing that were not available on the D70. Further, the sensor megapixels rose to 10.1 versus 6.1, which would be visibly different in the image, allowing for more cropping and greater enlargements. I gave the D70 to my daughter Sally and purchased a D200. It made me feel like a pro of sorts.

With the D200, I continued to try to raise the level of my photography beyond simple family snapshots, though I still made plenty of them.

Parker leading the pack at Cub Scout Camp
on the Jax Beach shoreline
Nettie and Madeline at the Iowa Caucus in 2008

Nikon D300

The Nikon D300’s imaging technology was considered an evolutionary step beyond its predecessor the D200. The D300 offered an increase in megapixels from 10 to 12, which may have not been visibly noticeable; however, the D300 had better color rendering, better highlights, better shadows, enhanced autofocus and far better battery life. By the opinion of most reviewers, it made the D200 technologically obsolete. Sadly, the D300 arrived just shortly after I purchased the D200, and Nikon’s marketing machine beat me into submission. As a result, I sold the D200 to an associate at my university and purchased a D300!

As I wrote earlier, the middle late 2000’s was a period of rapid development in digital sensor and data processing technology. Photographers like myself suffered from fear of missing out (FOMO) and were easy prey for corporate marketing strategies. I don’t regret dumping the D200 so quickly, but I probably could have saved money and taken photos with it just fine for several more years. Moving from model to upgraded model was the state of the hobby back then. In the end, my experience with the D300 was that it was an excellent and versatile pro-level camera. I took a lot of excellent photographs with it.

Many of the photos I shot were of everyday quotidian life, but I continued to push myself to add a level of artistic expression to the images. The D300’s rapid shutter speed, color rendering, and improved low light sensitivity let me push my photographic boundaries a bit further beyond my previous cameras. It was a ruggedly built device too, so I took everywhere when travelling.

My friend Grant on the drums
evening on Lake Superior
Parker rounding third base and heading home for the score

Nikon D700

As with all the other Nikons that I owned, the D300’s sensor was a DX size, which meant that it was measurably smaller than the size of 35mm film, which the original film SLR’s used. The DX size limited the field of view that could be capture and required lenses to be multiplied by a factor of 1.5 to accurately express the true focal length.

As I recollect, at the same time that the D300 was introduced, Nikon also began selling a model designated the D700. Though its external appearance was very similar to the D300, internally it contained an FX sized sensor, which was the size of 35mm film. What this means is that DX has about 60% of the surface area as compared to an FX sensor. The FX was commonly referred to as a full frame sensor. At that time, in the middle-late 2000’s there was a good deal of discussion about the merits of FX vs DX sensor technology. Many hardcore photographers believed FX full frame was the only way to go because it best replicated the “film experience.”

FX vs DX field of view and sensor size comparison

Both the Nikon D300 and the D700 had 12.1 megapixel sensors; however, because of the size advantage of the D700’s more expansive FX sensor, its pixels were comparatively larger. If you consider that a pixel is a light capturing bucket, then the D700’s are considerably larger than the D300’s, permitting it to capture more light, which in turn allows it to be much more effective in low light situations, and also to capture more data from an exposure yielding more color richness and image detail.

I shot with the D300 for several years and was delighted with its performance; however, after exposure to consistent praise for the D700 during those same years, I eventually opted to purchase a used one from eBay. In short the D700 was, in my opinion, a breakthrough piece of technology. I now consider it a classic camera. The images it created were magical. Combined with the acquisition of a Nikkor 105mm macro lens, the D700 opened a broad new vista of artistic creativity for me. I was functioning at a higher level than ever before.

lead end of a corn snake
Macro shot of a Self-Heal wild flower
Macro shot of a Dahlia bloom in the rain
Headwaters of the Mississippi

Note: the D700 is now in my son Parker’s hands and still functions beautifully. As I said, it is a classic camera. On the other hand, the D300 shutter quit functioning, which was a disappointment. It may have been repairable, but I thought that would be throwing good money after bad as I’d moved away from DX sensor photography.


Nikon D810

In the summer of 2014, Nikon announced a new flagship model called the D810. It was a major enhancement beyond the magical D700. The D810 was such a quantum leap in technological advancement it raised questions among D700 shooters as to whether it was time to upgrade.

For photographers who dislike using flash like me, the D810 was capable of working in lower light than any other Nikon. More importantly, the sensor resolution leapt from the D700’s 12.1 megapixel up to the D810’s 36 megapixel, thus the camera with its FX sized sensor was capable of grabbing huge amounts of detail for an image. In fact, for me it would require a computer upgrade to handle the files efficiently. There were other enhancements like enhanced LCD resolution and improved autofocus too.

Nikon D810 kit

Reviewers at the time haled the D810 as “the best” professional camera available, so I ordered one and handed the D700 down to my son, who has used it to good effect. I’ve used the D810 for the past 9 years with little thought to upgrading because it never limited my creativity and often resulted in amazing photographs.

Along the way, I built a conserable support kit for the D810, including a pro tripod, monopod, state-of-the-art ball heads, multiple lenses, including two for macro shooting, a standard top mount flash, and a lens mount flash. Here are some example shots made with the D810:

Shoemaker in Florence, Italy
Monarch Butterfly in an Iowa Prairie
The Grand Tetons and Jenny Lake
Compass Plant in an Iowa Prairie
Anole Lizard in a North Carolina garden

Leica Q3

Just this spring 2024 I purchased a new camera, which has offered me a fantastic experience as a photographer. The background story on my purchase can be found on this weblog here. Below are examples of some of the images I’ve taken with the Leica thus far.

Bloom from a Tulip Tree
Dogwood Tree bloom
May Apple wildflower bloom
Local guitar luthier in Carrboro, North Carolina
Springtime in Fearrington Village

Glass and Silicon… Entering the World of the Leica Q3…

The best camera is the one you have with you – Chase Jarvis

Nikon D810 Kit

Much of the writing on this weblog focused on my involvement with guitars and roots music; however in addition to music, I’ve been a dedicated photographer too for many years. I spent years with film cameras, but I’ve used DSLR’s (digital single lens reflex cameras) almost as long as they were available, including the Nikons D70, D300, & D700.

For the past nine years, I’ve happily used a Nikon D810 kit for my photography. In addition to the camera itself, I also own a multiplicity of lenses, tripods and flash lighting systems. It was and still is a fantastic camera, and photos taken with it adorn the walls of my home and those of my kids. I generated over 4000 followers on Tumblr with photos shot from the D810 and I used it extensively to support my work as a university professor, including shooting fashion shows and teaching several semesters of fashion photography. I even held an art show of my photography at my local coffee shop when I lived in Iowa.

Macro photo of an Atamasco Lily with the D810

Over the years I’ve shot a variety of styles, including sports, fashion, and landscapes, but I have a special affection for macro images, particularly wild flowers in the woodlands and the prairie, which was facilitated by my residence in Iowa for over two decades.

Landscape Shot of Monument Valley with the D810

Despite the incredible capabilities of the Nikon D810, I’ve found it. over the past couple of years, to be a major burden to haul around. The camera, particularly with one of my macro lenses attached, feels like a cinder block around my neck after just a short time out and about. Sadly, I am no spring chicken anymore, and as a result, I am less inclined to have my camera with me when I should. I find myself too often using my iPhone 11 Pro Max. In a pinch, the iPhone grabs a decent image, but there’s so much more a good camera can do by comparison.


Is There A Lighter More Capable Camera?

Shot of my son driving to the hoop with the D810

It occurred to me that it might be time to search the marketplace for a lighter camera that I would be more willing to carry around with me when I was out and about.

Since the time I acquired the D810, the technology for digital cameras transitioned rather dramatically away from Digital Single Lens Reflex (DSLR), technology, where the camera used a mirror to divert the light traveling through the lens to the view finder so the photographer could frame the image. When the shutter was activated the camera would lift the mirror up out of the way to let the light traveling through the lens strike the digital sensor. To reduce mechanical complexity and to limit the internal moving mass of the camera, the new technology eliminated the mirror and introduced an electric view finder (EVF) to take light directly from the lens to the viewfinder, to produce what is referred to in the marketplace as a Mirrorless digital camera. In very short order, the major manufacturers of digital cameras dropped production of DSLR’s.

iPhone Shot recognized by Lensblr on Tumblr

To save weight I gave passing thought to acquiring a mirrorless Nikon, but examination of the specs indicated the newer cameras were not particularly lighter and there was serious question as to whether my existing lenses would work effectively on the newer mirrorless camera bodies. Buying a whole new kit with no appreciable gain in portability made no sense to me. I was further convinced when I saw a neighbor hauling around a new state-of=the-art Sony camera body with a telephoto lens and it looked like a back breaker.

Horst Faas and his Leicas

In addition to the Nikon mirrorless cameras, I also considered a Leica as a lighter, but very capable “walk around” camera. I was influenced by images of war time photographers like the great Robert Capa and Horst Faas using the smallish Leica film cameras of their day. They now manufacture state-of-the art digital Leicas which are highly regarded. Further, my old fraternity brother John Gellman who has been a major influence on my development as a photographer, also shot with a Leica for a time.

Not knowing much at that time about the array of models that Leica offers, I initially only looked at their M body and some of the detachable lenses that they offer. I was put off very quickly by its prohibitive pricing, and did not realize at the time that the M is strictly a manual focus camera, which would have been a deal killer for me.


I Choose the Leica Q3

Leica Q3

A year went by after I dismissed the notion of purchasing a Leica. In the meantime, springtime arrived again in the Piedmont of North Carolina where I live, and it can be stunningly beautiful. There were too many photographic opportunities that I was going to miss because I resisted schlepping my big Nikon around. Consequently, I decided to take another look at Leicas. This time around I dug deeper and attempted to familiarize myself with the broader array of Leica models and in very short order I noticed a great deal of positive buzz about the Q model camera. The Q3, which was announced in May 2023, is the third generation of this model camera.

Leica Q3 – lens cap off

I learned that the Q3 is regarded as a compact camera and that both Sony and Fuji also make popular versions in the same genre. These compact cameras are relatively small, have a fixed lens (around 28 mm), a mirrorless shutter, autofocus and selectable control of aperture, shutter speed and ISO sensitivity. They do vary in terms of the sensor resolution (i.e. megapixels), sensor size, and the proprietary algorithms used to process the image data. The viewfinders also vary too as to whether they are optical, electronic or their internal size.

If you take the time to explore YouTube there is an abundance of information about cameras and photography, including dozens of reviews on compact cameras, thus making an informed purchase decision possible. Below is an example of a typical Q3 review:


On YouTube most reviews for the various cameras are enthusiastically positive, so they should be taken with a grain of salt; nevertheless, the basic camera specifications and capabilities differentiating the devices become pretty obvious. There were some key elements that made the Q3 stand out in my meta-analysis. The Summilux 28 mm, f/1.7 lens paired with the state-of-the-art 60 megapixel sensor set the Leica apart. Also attractive to me was the large bright EVF, and the sleek relatively simple control features to manage the camera. The downside was the expense, but no compromises are made in the design of this device. You pay for the legendary history of Leica, the design, and their incomparable lenses.


Purchasing a Leica Q3: Largely a Matter of Timing and Luck

Deciding to purchase a Leica Q3 and actually acquiring one are not the same thing. There are limited supplies of the camera and considerable global demand making it a challenging purchase. Initially unaware of the limited supply of Q3’s, I went to trusted national retailer B&H Photo but was informed that the Leicas were on backorder with no estimate of resupply. The same was true with Adorama, as well as every other reputable online camera sales organizations. Scalper prices were available on Amazon and eBay, but aside from the extra exorbitant pricing, there was probably a very good chance that their supply was from the gray market, meaning they were slipped into the U.S. from Europe or Asia through the back door, putting legitimate service and warranty at question!

Leica Meatpacking District, NYC

I placed an order with B&H but had no idea what the wait time would be. After a couple of weeks of frustration, I received some advice from one of the several Leica Q Facebook groups. One knowledgeable member suggested calling around to the U.S. corporate Leica stores. I had no idea that there were such stores, and a quick search indicated there were eight of them. The third call was to the recently opened Leica Shop and Gallery at the Meatpacking District of NYC. I stumbled into good luck because the store was so new, they had a very small Q3 waiting list and a shipment arriving very shortly. Two days later I closed the deal on a Q3. The people at the shop were very accommodating.

I completed the order on a Friday, and the camera arrived on Monday, which I thought was pretty amazing. To the left, you can see what arrived with my order. The Q3 camera itself and the battery comprised the basic order. In addition, I grabbed the Leica half leather protective case, a Leica UV filter and a 128 Gig SD card.


Setting Up My Leica Kit

Leather Half Cover

There is a prevailing belief that a filter to protect the lens limits how much light can transmit through to the sensor. On the other hand, the Summilux lens is so exquisite and expensive, I am not going to leave it vulnerable to scratching, so I put a Leica filter on it. In fact, the Leica ambassador in New York recommended one. By the same token, I want to protect the camera body as best I can because I plan to keep it around my neck a lot, so I purchased the Leica buff-colored leather half case. The front half of the camera is protected by the case, but the back is left open for the LCD Panel and the various surface control interfaces. You can see on the right that the protective case has a trap door at its bottom to access the battery compartment, which is great, but the SD card slot and the side ports are not accessible, which makes the case a bit of a pain in the ass because it must be removed to get to those features. Fortunately it is a relatively easy install and removal… still…

Battery and memory card access for the Q3

To the left you can see the lower portion of the camera where the battery compartment is, as well as the memory card slot. As I mentioned above, with the leather half case installed the battery is easy to exchange, but not the memory card. I’ve seen half cases from other non-Leica manufacturers that have a larger access area so that the memory card can also be accessed.

Thumb grip and soft shutter button

At this point, I should note how outrageously expensive Leica brand accessories are. There are less expensive after-market products that perform the same basic function; however, I decided to trust Leica engineers to produce a case that fits perfectly onto the camera since it serves such a major protective function. The same logic held true when I made a decision to mount the Leica brand thumb grip. The Q3 was a bit like holding onto a wet bar of soap until I mounted the thumb grip. There are other aftermarket grips but in my opinion none engineered as precisely as the Leica version. You can see above the brass thumb grip which locks firmly onto the flash shoe. Note also the two black function buttons on the grip that sit astride similar buttons built into the Q3’s body and work perfectly.

Soft shutter release

On the other hand, I mounted an aftermarket soft release shutter button onto the Q3. You can see it in the image to the left. The standard shutter button is flush within a circular enclosure on the camera body, so you have to dig down a bit with your finger to activate it. The soft release screws into the shutter button, and makes it far easier to fire off a photo. I saw no reason to pay the exorbitant Leica price and instead acquired a very nice one from Popflash Photo for one third the cost.

Leica Q3 battery

To complete my kit I also added a spare battery and a small carry bag. The extra battery I purchased because the Q3 too rapidly drained the battery when I had the camera on for an extended period of time while watching Youtube videos for proper set-up advice. Now that I am using the camera on daily photography walks, I keep it turned off until I need it for a shot, and as a result the battery charge is lasting much longer. Still, I think it’s good form to have a backup battery even though it was quite pricey.

Domke Case

The Domke bag, that I purchased is shown on the left and is a brand I’ve used before. My main Nikon kit is in a large Domke bag, which you can see at the top of this article, and a similar but smaller one is used to hold a Nikon D700 which is now with my youngest son. Domke manufacturers well made coated canvas bags that are moderately priced. While sourcing other camera bags, I observed that some of the bags very popular among Youtube and Facebook Q3 owners ranged in priced from $600 to almost $1000. The Domke is a fraction the cost. All this leads me to believe (as a person who co-authored a book on fashion theory) that those wildly expensive camera bags serve more as a status symbol than the functional Domke I now own. This also suggests that there may be some people who purchase the Q3 for as much as a status symbol than for the extraordinary photographic technology that it represents.

Shooting With The Q3

Leica Q3 shot of Springtime in my Village

For me, the Leica Q3 has been a delight to own and shoot with. I’ve been amazed at the initial color rendering, the dynamic range of light to dark, and the general clarity of the images. Of course, the image needs to be framed skillfully and the camera needs to be set properly at the outset to achieve the highest level of image quality (IQ).

Framing the photograph properly was my initial challenge with the Q3. I do not ordinarily shot with a wide angle 28 mm focal length. To get a photo that suits me with 28 mm, it requires getting close to the subject or cropping the image in post processing. A 28 mm lens grabs up a good deal of real estate, but because the camera’s resolution is so great at 60 megapixels there is the capability to crop the image quite dramatically, though it makes me a bit anxious to discard so much data.

Below you can see a surreptitious street photograph of a woman sitting across from me in my Village. I thought she looked interesting, but at the distance I was sitting from her, the 28 mm lens grabbed way more than I was interested in capturing:


Below is a severe crop of the above image, and now you can see the interesting visage of the woman sitting across from me. Despite the severe crop the image is not breaking up and is holding together well because 60 megapixels offers you a lot of leeway. I would not recommend this level of cropping as a habit, nor would I recommend making a large print of this image, but for a social media post it would serve its purpose quite well.


Q3 LCD Panel

When taking your shot, the image can be observed and framed either through the EVF or from the LCD panel. The information available to the photographer is exactly the same. A light meter and other important settings including aperture, shutter speed and ISO are visible. I prefer to use the EVF when I shoot, with the possible exception of some down low macro shots, and there I’ll use the tilt-out LCD to great effect. In direct sunlight, when I use the EVF, I find my self cupping my hand around the viewfinder so that I can see it well.

I initially used the camera in complete manual mode, with the exception of autofocus, which really slowed me down to concentrate on what the camera was doing. After a while, on the recommendation of one of the many Q3 photographers on YouTube, I set the shutter speed and ISO to automatic with a ceiling of ISO 3500. I set the aperture myself and concentrate on framing the image. In addition, I have the camera exposure adjusted to one stop below optimal to preserve bright highlights. With this arrangement my exposures have produced many useable images like the one below of the Old Well at the University of North Carolina.

The Old Well with the Leica Q3

The Macro barrel selector

I mentioned earlier that I have a natural predilection for macro photography and as a result, the built in capacity of the Summilux lens for macro work was a major selling point to me. A simple twist on the barrel of the lens converts the Q3 into an effective macro shooter. My Nikon kit contains two macro lenses, a pair of screw on magnification lenses and a macro flash set, so it’s hard to beat the images it produces, but it is so heavy I now hesitate to drag it around. Fortunately, the Q3 is far more portable and the macro images are very nice indeed, as you can see below:

Macro shot of a wildflower with the Leica Q3

The Aperture barrel selector

Another feature I really like about the Q3 is how fast the Summilux lens is, with its maximum aperture of f/1.7. With a lens that opens so widely, the photographer has lots of opportunity to play with shallow depth of field, which adds another element of art to my available palette. The Summilux’s out of focus bokeh is also very pleasing to the eye.

Further, the fast lens combined with the Q3 sensor’s wide dynamic range and low light noise control gives the photographer a great deal of leeway in low light circumstances. Most photographers on Youtube recommend using an ISO ceiling of 3500; however, others believe you can go a step higher and still maintain clarity, sharpness and low noise. I have yet to work with the Q3 in low light, but look forward to it. Below, you can see one of my experiments with narrow DOF indoors with natural light:

Demonstration of the Leica Q3 at f/1.7

In Sum

I’ve owned the Leica Q3 for a few weeks and to this point, delighted with my purchase. The camera is light enough to carry around everywhere, which I do, and if I properly work within the constraints of the fixed 28 mm lens, it is possible to make some excellent photographs. In short, this camera is a very flexible companion and a great deal of fun to use.


New iPhone Buyer’s remorse… not this time…

For the preponderance of my working career I was involved with Higher Education and as a result taught countless classes and gave a myriad of professional presentations. It was my philosophy to never stand before an audience without interesting visual imagery to support or augment the points I was making. This modus operandi holds true for this weblog. If you’ve taken anytime to glance through my various posts you’ll note they include quite a number of photographs. Consequently, possessing the capability of creating relatively high quality images is important to me as I communicate through this website.

me with the big gun… Nikon D810…

Since 2005 my primary photographic weapon of choice was a Nikon Digital Single Lens Reflex Camera (DSLR). I been through multiple iterations of Nikon cameras and currently use a 36 mpx D810. As you can see in the photograph to the left, the D810 is a large and heavy camera, especially when a telephoto or macro lens is attached.

For the ultimate in image quality (IQ), a DSLR is hard to beat and will always be my first choice when embarking on a serious photographic mission; however, lugging the big gun around is not always convenient and photographic opportunities often avail themselves when the big DSLR is not in my possession.

For serious photographers, another solution besides a big gun is to carry a point and shoot camera. If you’re willing to spend the money, a point and shoot can take a very nice image. For example shown below, I shot this Zion National Park landscape from horseback, one handed … No way could I do this with a DSLR because it’s too heavy to haul on horseback and I learned very quickly a horse has no patience for a rider who is not holding the reins with at least one hand and you cannot shot a DSLR single handedly.

Zion National Park shot from horseback with a Canon S100 point and shoot…

Despite the convenience of a small point and shoot camera compared to a DSLR, it still requires intentionality to always have the small device available when a photo opportunity presents itself and for me that’s simply not going to happen as I haul around too much stuff as is…

All of this discussion leads me to my main point and that is “the best camera” is the one you have available at the time a photo opportunity becomes obvious, and today the best camera is most often the one you have integrated into your personal communication device or handset, i.e. iPhone. Up until recently, I wandered through the world with an iPhone 6s, which takes a decent photograph, but does not hold up remotely to a “professional” point and shoot. That presumption may not be true anymore. The new phone cameras are so good, they’ve practically driven the point and shoot market out of business and even push the need for a DSLR. This advancement in iPhone IQ became obvious to me during a recent visit to my daughter Sally and her family in Wilmington, NC.

There is a Pocosin preserve in Wilmington located behind a grammar school just a short ride from Sally’s home. Pocosins are marshy areas tucked within a pine forest and are the only natural habitats for Venus Flytraps in the world. These Pocosins exist only in the coastal areas around Wilmington, NC so it is a real treat to visit one and photograph the plants that grow naturally in that region. Further, some of my father’s ashes are also scattered in this Pocosin.

So, while visiting Sally, I took out my big rig, equipped with a close-up (macro) lens and went out to commune with my father’s spirit and to take some shots of the carnivorous plants in the Pocosin, some of which can be seen above.

Along for the visit to the Pocosin were Sally and my grandchildren and it was there that she took the opportunity to photograph me with Edie B. and Π (Pi)  (known also as Peter), which can be seen below:

iPhone photo taken of me and two of my grandchildren, Edie B. and Π… note the big gun hanging from my neck…

Later when we got back to Sally’s home and I had a chance to see the photograph of me and the grandchildren I was awestruck by the quality of the image, including the exposure, color rendering and the detail. Sally took this photo with an iPhone X, which was at that point the state-of-the-art iPhone. It was then, after studying that image, I decided that upgrading from my 6s was in the immediate future. It is unusual not to have my iPhone with me and with the new improved camera, it’s a no-brainer if you love to take quality images!

So, in a nifty jiu-jitsu pivot move I handed down my 6s to my wife who had an iPhone 5 on its last legs and ordered the new iPhone 11 Pro Max when it became available, which I’ve had for a few weeks now:

Ordinarily in the past when I’ve upgraded my iPhone, I’ve suffered buyer’s remorse big-time because the phones look and act essentially the same from version to version. But having waited out multiple versions of the iPhone over the past 3.5 years, there are some remarkable differences, most notably with the camera. I’ve included some of the iPhone 11 images below. While I would not consider the shown photos super extraordinary they are very functional. The photo of the old Capital in Iowa City is one of the new iPhone night images. While the upper dome is a bit blown out, it’s not at all a bad handheld taken in the dark photograph!

So, to wrap this discussion up, I am delighted with the photographic capability that the iPhone Pro brings to my disposal. In summary, here’s some pros and cons of the new device relative to my older iPhone 6s:

Pros:

  • Great camera with telephoto, wide angle and night shooting capability
  • 12 mpx camera to capture pretty incredible details
  • Faster operating speed
  • Accurate facial recognition to open the device
  • Massive storage at 256 Gigabytes to store bunches of music, videos and photographs
  • Is still an iPhone and does all the things iPhones do better than in the past
  • Siri is smarter and will automatically put me on speaker phone, which is what I use almost exclusively
  • Now has a battery that lasts for days
  • Has a huge screen which is great for photo editing

Cons:

  • Expensive
  • Heavy and large… the Pro Max weighs almost a 1/2 pound (220 grams)
  • I wish I had gotten a grippier phone cover… the fancy pants Apple leather cover is like handling a wet bar of soap

Whaddya Got to Say?!?!

Over a billion people have stand alone cameras or phones equipped with camera, and the world is awash in digital images… conservative estimates are 14 trillion photos per year! What are all these photographs about? Let’s speculate about some common ones:

  • Family and friends
  • Selfies documenting activities, trips etc.
  • Documenting activities and objects observed
  • Artistic expressions
  • and so on… just look at Tumblr, Facebook, Pinterest or Instagram

I’ve done all of the above with either an iPhone, a pocket camera (rare nowadays) or a pro-type DSLR Digital Single Lens Reflex); however, the most gratifying are the artistic expressions that I try to create using the camera.

Using a DSLR, for me, is a craft in how the technology of a moderately complex mechanism is brought to bear on a subject, along with the associated post-processing software. But most importantly, it is a medium for creative self-expression.

Creative self-expression is where the rubber meets the road. It’s a combination of the eye for a composition and the execution of a vision by effective use of the craft. Most importantly, I think, for effective creative self-expression one is best served by having something to say with the image. This can be seen on Tumblr, where the most effective photographers exhibit a thematic sensibility with their images. In other words, the most effective photographers have something to say with their photographs about a particular subject. That’s not to say that photographers need to limit themselves to a single subject; however, flitting around all over the place does not give viewers a sense for your identity as a photographer.

For me, one of the best example for what I have to say involves tall grass prairie wildflowers. The countryside of Iowa, where I live is dotted with restored prairies and some ancient relic locations that have existed for thousand of years. Every summer, the prairies bloom an incredible variety of flowers which are quite fun to photograph using close-up or macro techniques.

When a thematic area is addressed in detail, one’s eye may develop to the point of creating a relatively unique view and expression of the subject to the point that a reputation for expertise is developed. For example, I’ve been requested to shoot prairie images for my university’s Tall Grass Prairie Center!

Get proficient and create a body large enough and then you can do an art show… share what you have to say about a subject! Below is an art show of my prairie and landscape (another favorite subject) photographs at our local downtown coffee shop.

Let me wrap up here as this blog entry may be getting too long… Many times I’ve heard others say “I’d like to get into photography”… Here’s what you do: get a camera, learn how to use it, take photographs and demonstrate what you have to say about a subject!

Moving on from Adobe…

Capture One workspace and post-processed image of prairie bloom…

Back in 2005 I purchased my first DSLR (Digital Single Lens Reflex) camera and was quickly appalled at how flat and drab looking the photographs looked onscreen despite being shot with a “dead-on” exposure value. What I learned quickly was that DSLR images must be post-processed to draw out the essence of the image.

Often fine tuning included adjustments to:

  • Highlights and Shadows
  • Contrast
  • Saturation of color
  • Brightness
  • Clarity

This had to be done using post-processing software and it had to be purchased separately from the camera. At first I used Nikon’s NX, but their support and the functioning of the product became very sketchy, which was a shame as it worked quite well. Then I transferred to Apple’s Aperture which was outstanding, easy to use, effective and, over the course of time, I happily went through several upgraded versions of it and it only got better.

While I was plugging along with Apple’s software, there was an ongoing debate among the photographic cognoscenti about Aperture vs Adobe’s Lightroom and which one was best. Lightroom would eventually dominate the landscape as it worked on multiple computer platforms. Even so, I was very pleased with Aperture and saw no reason to switch to what appeared to be a more clunky Lightroom until Apple, as they do, pulled the rug out from under me and killed support for Aperture, which meant that as Apple’s operating system was upgraded, Aperture would no longer work in the near future.

So… reluctantly I switched to using Adobe’s Lightroom for post processing. Fortunately, my university supplied the Adobe suite to professor’s as a perk and I had copies on my office desk and personal MacBook. Lightroom worked just fine and also recognized plugins that I had been using with Aperture, namely the Nik plugins that are so useful for somewhat fancier post processing, such as local spot changes to an image or state-of-the-art black and white conversions.

Then I retired from the university. Silly me… I thought that as an Emeritus Professor I would still have access to Adobe software… wrong… literally the day after my last day, I got thrown under the bus… I was cut off and no more Adobe Lightroom… I was loath to use Adobe on my own because of the egregious monthly charges they insist upon and it was just not that good… Constantly being upgraded, it never seemed to improve and always remained, in my judgment, a bit clunky.

So I shopped around for a replacement and frankly there are not many. Only one stands out as a legitimate contender. As with the Adobe products you can buy a monthly subscription to Capture One, but Instead I purchased a stand alone copy. My wife subsidized the cost as part of a birthday gift.

So far, I am very pleased with Capture One. It does everything that post processing software should do both precisely and quickly and works well with my Nik Plugins. Since photography is one of my important retirement endeavors I am delighted to have a decent, beyond Adobe, post-processing platform!

Capture One post processed image of a common prairie forb (bloom)