There is a road, no simple highway
Between the dawn and the dark of night
And if you go, no one may follow
That path is for your steps alone
— The Grateful Dead
Introduction
I’m not getting any younger and this past summer I entered my 7th decade. A couple of years ago when I embarked on retirement, my fund manager/guide offered me sage advice when he bade me not to wait too late to experience what I wished to (within reason).
To those who know me and others who’ve read this weblog, it is patently obvious that as a pensioner, I’ve pretty much devoted my efforts to developing myself as a musician/guitarist. While I’ve made tangible progress in my pursuit, there really is no end to the path I’m on… the guitar is an insatiable instrument with unlimited expectations for its players, and it will carry me to the end…
As a dedicated guitarist, I aspire to play the finest instruments that can be acquired within reason. In the past I’ve found that the best way to keep things within reason is to trade/sell an existing instrument(s) against the acquisition of another better one, which happens to be a common behavior among many guitar players! About a year ago, I traded two Taylor electric guitars for a Collings I-35 electric guitar (reviewed here). When evaluating the I-35, I became enchanted with the founder of the company. He was a singular, creative, precision driven engineer and world class manufacturing leader in the marketplace of guitars. As a result, I developed an interest in eventually adding a Collings acoustic guitar to my stable. Below is a brief video about this man, the late Bill Collings:
You can break down guitar building into two basic categories: factory versus luthier built. That’s not to say that some factories do not employ luthier quality builders, but the term luthier built suggests an individual who designs and assembles a guitar in a private shop from soup to nuts… i.e raw wood to finished product.
One of the most highly regarded luthiers in the U.S. is Ervin Somogyi, whose exceptional book on acoustic guitar design I purchased and perused a couple of years ago. Most of Somogyi’s guitars are museum pieces that command staggering sums and are really built for well-financed private customers. Somogyi applies his skills to extract maximum sonic performance from wood and steel, and his embellishments often rise to high art. Somogyi is also a bit dubious about many but not all of the other independent luthiers practicing in the U.S. He pretty much says in his book that just because a person can build a guitar from scratch does not guarantee it will be a high quality instrument. Results will vary widely from builder to builder, so he says be wary of in the luthier marketplace. I simply do not trust that I have the wherewithal to distinguish a high quality luthier produced guitar from a run of the mill one. Consequently I stick with recognized factory built instruments because of their long history of essentially decent performance.
The preponderance of guitars in the U.S. are built in factories of varying sizes with wide ranging production capacities, specifications, price points, manufacturing philosophies and subsequent qualities. In the U.S. Taylor, Martin and Gibson are excellent examples of the larger decent quality guitar producers. It’s hard to go wrong buying a guitar from those manufacturers, though it is important to be aware there is some product to product variability in performance simply because the guitars are built from wood which is a naturally variable material. In other words, these manufactures build, on average, decent instruments; however, within each companies productions some guitars may be better and some not as good.
Purchase choices are often based on taste and/or tradition-based brand loyalty. For example, I’ve owned several Taylor guitars because I liked their playability and voicing, whereas neither Martin nor Gibson ever appealed that much to me. I know other players who would never consider any guitar other than a Martin.
Besides the big companies, there are a host of smaller factory producers, such as Santa Cruz, Breedlove, Bourgeois and Collings who produce limited numbers of instruments mostly because of the care, materials, embellishments and extra labor they apply to perfect their products. Sometimes these smaller companies are referred to as “boutique” manufacturers.
Here’s a brief video that speaks to Collings manufacturing excellence:
Choosing among the small manufacturers is largely a matter of expendable income, taste and knowledge of the company’s specific products. Product accessibility may also be one of the most important variables. In fact, I’ve never actually seen a Santa Cruz, Breedlove or Bourgeois guitar in any of the stores I’ve ever frequented. I suppose I could acquire a boutique guitar online, but I would not want to spend that kind of money without trying the instrument out myself beforehand. I’ve had mixed experiences buying online. Having the ability to trade for the purchase was also a prerequisite for me, and that’s difficult to do online.
Unlike the other small builders, I’ve had some access to Collings acoustic guitars in nearby Wisconsin at Dave’s Guitars. I auditioned several of them a few months ago and thought they were decent, but still reserved judgment until I could A/B compare them to my current Taylor guitars. I still suspected that those guitars when compared to Taylors, Martins and Gibsons were a cut above, with their unique voicing (appealing to me), and build approaching the level of care and individuality claimed by independent luthiers. I intended to give Collings acoustics another visit in the future.
I Get Serious About Collings Acoustic Guitars
Last week, I finally said to myself, “the hell with it, I’m not getting any younger” and decided to see what kind of trade-in offer I could get from Dave’s Guitars for my 5 year old Taylor 812ce. Usually what triggers me is reading about a musician, near my age, who croaks for whatever reason.
I’d special ordered the Taylor 812ce through Bob’s Guitars in my home town. You’ll note in the image on the left, I ordered the guitar without a pick guard since I play finger-style. The Taylor was a good guitar and I enjoyed playing it. A few years ago, when I was changing the strings, I inadvertently knocked a chunk of wood off the bridge. Taylor Guitars was kind enough to replace the bridge under warrantee if I paid for the shipping. After repair the guitar looked the same, but it never sounded quite like it did originally. I don’t think it was my imagination.
Upon inspection of the guitar via photographs, Dave’s Guitars made me a modestly reasonable offer, which they improved upon later when I arrived at the store. One issue that irritated the hell out of me was Dave’s statement that X-braced non V-Class Taylor guitars now have reduced trade-in value. A few years back, Taylor Guitars redesigned their bracing system to a V shape, supported by a massive marketing campaign. I actually think the older guitars sound better, but it’s hard to fight the extraordinary power of Taylor marketing.
So, I loaded up my car with the Taylor 812, my iPad which contains all my music and a mic stand equipped with an iPad holder. It’s a long 2.5 hour trip through the hinterlands of Iowa and Minnesota until you finally traverse the Mississippi and enter the river town of LaCrosse, WI. Dave’s guitars is within spitting distance of the river itself. Below you can see of section of the Acoustic Guitar Room at Dave’s. They have a large showroom…
I arrived early enough to get plenty of time auditioning the Collings acoustics that were available in LaCrosse. I planned to A/B my Taylor with several of the Collings with a focus on 12 fret guitars with slot-heads, since that was what I was what my Taylor was. My other acoustic guitar that I am keeping is a Grand Concert sized, 14 fret, fancy-pants, fully decked out, Taylor 914ce. I wanted to make sure the Collings I selected would be distinctly different from the Taylor 914ce.
To the right you can see the Collings section of Dave’s Guitars, which contained three 12 fretted, slot-head guitars. Two of those can be seen on the lower row on the far left and far right. The guitar on the left was a 02H Traditional with a sitka spruce top and Indian rosewood back and sides. The one on the right was a 0001 Custom made with all mahogany top and sides with a custom dog hair finish with Pearloid appointments. Not pictured is a 0002H with a sitka top and Indian rosewood back and sides. When I shot this image that guitar was being equipped with a pick-up because I intended to take it home.
When I auditioned the guitars, I sat down at the wall of Collings guitars on a comfortable stool and 90 minutes disappeared. I played all three of the slot head Collings, along with the Taylor 812ce side by side over and over again. It was absorbing and a lot of fun. The acoustic guitar room at Dave’s was quiet that morning, so I was able to give the guitars a nice listen to.
The 0002H was clearly the winner to my ears. The Taylor offered up nice clean and direct notes, but the 0002H played at a different level. Each note in comparison was almost 3 dimensional… in other words the notes bloomed outward. The 0002H presented more bottom, more punch and overtone. No contest… the Taylor was going on the trading block…
I gave the 02H a serious look, but it did not hold up when compared to the 0002H. I suspect there were a couple of variables at play here. First the 0002H as a larger lower bout which will make it louder and deeper sounding. Secondly, the Traditional series, as I understand it, was designed to be physically lighter and engineered to reduce overtones to give more clarity to individual notes. I can attest to the fact that the 02H was significantly lighter than the 0002H, to the point that handling it was a bit unnerving as it felt so insubstantial. In the end, I did not appreciate the individual note clarity. The guitar felt like it needed time to open up as it sounded thin and insubstantial when A/B’d with the 0002H. The 02H was far more expensive too. Move along… nothing to see here…
The all mahogany 0002 custom was quite an amazing looking guitar with it’s white pearloid headstock and pick guard contrasted with the blackened dog hair finish. It would be a crowd pleasing guitar based simply on appearance. It was the most expensive guitar by a long shot that I auditioned that day. I might have stretched for it had it sounded unbelievable, but the solid mahogany body just did not have the presence of the 0002H. Perhaps in time the mahogany would open up, but I did not have the patience to wait several years for that possibility. I kept going back to the 0002H after playing all the guitars several times over and decided to acquire it.
I carried the Taylor and the Collings 0002H to my store guy friend JR and closed the deal. When queried about installing a pickup, JR was emphatic that the K&K Pure Mini, a passive device, was the best choice. The Pure Mini is a simple 3 transducer pickup that mounts on the bridge plate inside the guitar. I went with his advice and was amazed at how natural sounding it was when I finally got a chance to plug in the guitar at home later that day.
Reviewing In Detail My 0002H
Below is my 0002H resting comfortably in its TKL hard case, which was sourced out by Collings because they do not make their own cases. They dabbled with producing cases at one point in the past, but it was unsustainably expensive, so they quit. The interior of the TKL case is decked out in the interior with form-fitting cushions, covered with a dark green velveteen fabric. The fit is tight and requires a light pushdown by hand to get the guitar properly seated. The case clasps function well, and one is lockable. Inside the case was the key, a Collings micro-fiber wiping cloth, the warrantee registration form (which can alternatively be done online) and a pressure sensitive Collings sticker!
A different view of the 0002H out of its case is on the right. You’ll note that it has an upper bout just shy of 10 inches wide, a narrow waist, and a largish 15 inch lower bout. The body length is just a little over 20 inches. The appearance evokes and older era and should be no surprise because this shape, originated by C.F. Martin is rooted in the very early 1900’s.
The narrow waist allows the guitar to fit in the lap very comfortably while playing in the sitting position, which is what I prefer. The combined upper and lower bout size difference creates a pleasant evenly balanced volume of tones, with plenty of low end to avoid thinness in output.
Again, the guitar is a 12 fret model with a slot head. The top is sitka spruce with back and sides being East Indian rosewood.
Starting at the top of the guitar, you can see below front and rear views of the headstock.
The headstock has a very pleasant “exotic” ebony veneer with a Mother-of-Pearl Collings logo inlay. I always found the excessively shiny veneer on the Taylor 812ce incongruous and not aesthetically in tune with the rest of the guitar. The Collings headstock just looks better. You might note too at the lower portion of the rear of the headstock is an embellishing pyramidal carving referred to as a volute.
The Waverly tuners are excellent and work far better than the Taylor tuners. Their turning action is reminiscent of the excellent Gotoh tuners I have on three other guitars. I am pleased that the Collings tuners are nickel because the Taylor ivoroid tuners can fall apart when using a mechanized winder for string changing.
When I had the K&K Pure Mini pick-up installed in the 0002H, the shop replaced the Collings spec’d D’Addario EJ-16 (.012″- .053″) strings with Elixirs of the same gauge. I observed two things when I got home with the restrung guitar. First, the string wrap on the peghead was done in a manner such that the lowest strings (the E strings) on both sides were in contact with the headstock wood which will quickly wear away the finish. To avoid this deleterious situation, the E strings should be wound on with one wrap to the outside and the remainder towards the inside. This wind does cause the E strings to take a sharp angle inwards, but they will now avoid contacting the wood. Examination of photos on the Collings website also indicate that all the strings are wound outside-in, which is unlike the winds used by Taylor and National on their slot heads.
The second thing I noticed was that the Elixir strings were far stiffer to play on this guitar than the D’Addarios, making it far less enjoyable to play. I also found the sound of the guitar adversely affected too, so as soon as I could I restrung the guitar with the original spec’d D’Addarios! Perhaps the strings won’t last as long, but now the guitar sounds and plays like the one I auditioned in the store. This was an odd experience for me because I’ve used Elixirs on my Taylor acoustics without any difficulty. Of course, for what its worth, Taylors are spec’d to play with Elixirs
The neck is Honduran Mahogany and the fretboard is stained ebony. There is no binding on the neck and the fingerboard is marked with elegant but simple Abalone short diamond and square designs.
The neck has taken some getting used too because it is a bit chunkier than a Taylor acoustic’s neck and it is the widest necked guitar I ever owned coming in at 1 & 13/16 of an inch. That’s a lot of real estate to cover and requires some readjustment of finger muscle memory. All good for finger style playing though.
Below you can see an image of the the back of the neck where it attaches to the guitar body. The neck has a lovely gloss finish that allows easy mobility of the left hand up and down the fretboard
Also visible on the left is the Ivoroid binding at the seam of the back and sides of the guitar as well as the grained Ivoroid cap on the neck base. The neck is a modified V-shape and compounded in circumference, widening outwards at the 9th fret. As I understand it the neck flattens out towards the body of the guitar which makes playing the higher notes in the region easier.
Collings employs a mortise & tenon hybrid attachment of neck to body. I am assuming this form of bolt on neck makes it easier to repair or replace the guitar’s neck. There’s some belief among guitar aficionados and builders that a dovetail join is the only way to attach a neck to a guitar’s body. In my judgement Taylor guitars proved that assertion wrong a long time ago.
The photo above and to the right show the East Indian Rosewood that comprises the back and sides of the 0002H. Collings builds their reputation on using the choicest tone woods for their instruments. The rosewood is straight-grained and a lovely deep brown with lighter streaking. The color is so deep it almost looks purple depending upon the light. Note too above the “zipper” backstrip that runs down the center of the guitar back. It’s quite striking.
I’ve tried lots of different tone wood combinations; however, I keep coming back to sitka spruce tops with rosewood back and sides as the classic combination that is most appealing to me ears.
The 000 sized Collings come in 3 basic styles, not including the wide variety of custom work they also offer. My 000 has the 2H designation, which basically means that it has some fancier appointments than the style 1, including the nice zipper backstrip, the geometric fretboard inlays, and most importantly the herringbone binding, which is a classic steel string acoustic guitar appointment.
To the right, you can see the sound hole section of the 0002H, with its elegant but not overly fancy rosette, which brings me to a point about the 0002H compared to the Taylor 812ce that I traded-in when I purchased the Collings. To be perfectly frank, the Taylor possessed a fancier level of appointment, including beautiful maple wood bindings, an abalone rosette with an inner sound hole maple border, and a more intricate fretboard inlay, all of it tastefully done and costing far less. But, and this is a big but, the Collings design, tonality, playability, and its visible connection to the past origins of guitar design make it a palpably singular instrument to own and play.
I’m not a big fan of pickguards as I play strictly finger style and I suspect they have some minor tone dampening impact on the guitar’s sound board. Had I the opportunity, I would have acquired the 0002H without a pickguard. Nevertheless, the 0002H I purchased from Dave’s Guitars had a pickguard, and you cannot remove one without the high probability of damaging the finish. I did note that the pickguard was pretty scratched up. I think the guitar had been there for at least a year and tested out by a number of people, including some careless assholes with a picks. My store guy, J.R. said that was no problem because they would buff out the scratches in their shop, which they did. The pickguard looks pristine now. I do not recollect how translucent it was before buffing, but now I notice the sound hole rosette grinning through the guard. After a query on Facebook, some other Collings owners suggested to me that it was always translucent.
In the above image, you may also note the nice, even tight grain on the sitka spruce soundboard. This is what Collings brings to the marketplace: the very best available tone woods.
Beneath the sound hole is the bridge section. The 0002H uses an ebony pyramid bridge, a design that harkens back to the 1800’s and some of the earliest Martin guitars. The bridge pins are unslotted, which some argue is a more robust design. I guess that may also be a vintage appointment. Residing in the bridge is a bone saddle which complements the bone nut back up the neck.
To sum it up, I am delighted and it is my great, good fortune that I have the opportunity to play a guitar of such character and build!
Add-ons
I needed a pick-up installed to be able to plug my guitar into my portable PA (Bose L1 Pro 32) and into other sound systems around town. This is because I host Open Mic Night once per month at a Coffee Shop, sometimes play other Open Mic Nights in town and do a rare coffee shop gig on my own.
The best time to install the pick-up was at point of sale because they do not charge for shop labor at Dave’s when a new guitar is sold.
Dave’s had available the L.R. Baggs Anthem and Lyric pick-ups, but as I said earlier, my guitar guy J.R. was emphatic that the simplest, passive pick-up like the K&K Pure Mini would be the best choice to avoid sound balance and feedback issues. I was dubious at first but agreed. It was a quick install because the three transducers shown above simply glue onto the bridge plate within the guitar’s body. When I got home and plugged the guitar into my Fishman Loudbox Artist, the 0002H sounded very natural, so I was please that I followed J.R.’s advice.
Because the K&K Pure Mini is passive, it does not come with a pre-amp built into the installation, which is nice in that there are no added dials or buttons involved. While I like the Taylor Expression system, I was never a big fan of the rubbery dial/buttons protruding from the guitars body. On the other hand, without a pre-amp the ability to tone shape your guitar’s output is absent which could be a problem when interacting with a PA out around town.
To remedy this situation, I acquired an L.R. Baggs Venue DI/Pre-amp/Tuner. It’s a very nice portable device capable of precise tone shaping. I used it during a recent gig along with the Bose L1 Pro 32 PA and it worked just fine. The additional Notch filter for dialing out feedback frequencies is very cool and works great.
If you’d like to learn more about the L.R. Baggs Venue/DI and to listen to sound samples from my 0002H, I suggest you click on the link to another one of my blog articles below. The sound samples are at the bottom of the entry.
