acoustic guitar – In Another Lifetime… Country Blues & Retirement in the Quotidian World…

November 20, 2024November 22, 2024

I Swap Out a Larger Irish Guitar for a Smaller More Comfortable One… I Review the Lowden S-50

Introduction:

During the Summer of 2023, right after I moved to North Carolina, on the way to visit my daughter in Wilmington, I stopped along the route at the small town of Southern Pines and visited Casino Guitars. I’d become aware of Casino Guitars because of the owner, Baxter Clement’s omnipresence on YouTube and, most importantly, I also knew that they were one of the rare U.S. dealers of Lowden guitars. I’d owned an all Koa Lowden many years ago and regretted trading it in and wanted to explore reacquiring one. With me along for the ride was my Collings 0002H as a potential trade item. I wrote at length about the purchase process of my Lowden F-50 on that trip and the blog article can be found here.

Me and my Lowden F-50 that I purchased in early June 2023.

Though I wrote enthusiastically about the F-50 when I published my review, I’d since become somewhat disaffected by the guitar. I’d written about the guitar’s playability and how I struggled with it, and finally took it to my local shop for a set-up. I was initially pleased with the set-up, but in time came to the conclusion that the guitar was just too difficult to play. When compared to my Martin 1937 Authentic and my Santa Cruz H-13, it was just not in the same league of playability. Consequently, I was playing it less and less, mostly because it was too difficult to fret the strings. Perhaps it was the long scale length, but more likely the string action.

Further, one evening a friend who is an accomplished guitarist, played the F-50 while I sat in front to the guitar’s sound hole. Unlike me, he really digs in with a pick, which is more aggressive than I ever play, and to my disappointment the instrument just sounded so harsh to my ear. Even though I play finger style with a lighter touch, I was deeply affected, and not in a good way by what I had heard. Still, I stuck with the guitar for a year, but I knew it was a serious problem for me when I finally put extra light strings on it, which was an admission that this guitar was just too difficult to play the way it was intended. Finally, the large lower bout, on occasion, resulted in shoulder soreness because of the “reach over” of my right arm required to play it. As I’ve written before, at the time of this guitar’s purchase my enthusiasm overrode my sense of good judgement.

I Return to Casino Guitars

On occasion, I check out Casino’s guitar inventory on their website and one day, I discovered that they’d stocked a new Lowden S-50! This is a smaller more intimate guitar than the F-50 that I currently owned. In addition, the guitar was built with Sinker Redwood over Cocobolo, which I thought would offer a warmer sound then the Spruce over Cocobolo F-50. Further, the guitar had a shorter scale length which in theory makes it easier to play. I was interested in auditioning this guitar.

I watched the S-50 from a distance for quite a while, holding my breath every time I dialed into the Casino website, hoping it was not sold. It was only after I crawled out of a month’s long medical rabbit hole that I decided to celebrate life and make a pilgrimage to Southern Pines to audition the S-50, and along with me was the F-50 to see if I could trade it in exchange.

The Lowden S-50, Baxter Clement and me….

It was a typical visit to Casino Guitars. The guys who work there were exceptionally helpful and when Baxter became aware I was lurking around the store, he came down from his apartment, which is upstairs above the shop. He made time to visit with me despite the fact that it was his son’s birthday and it was a Saturday. We played some music together and he auditioned the guitar for me too so that I could hear it directly. As you probably know, the acoustic guitar sound hole projects the guitar’s sound away from the player, so it’s nice for someone else to play the guitar as you sit in front of it. In the meantime, Sean gave the F-50 a once over and arrived at a reasonable trade in value.

In sum, the S-50 really suited my sensibilities and we closed the deal. Afterwards I met my wife for ice cream across the street from the shop and then we headed back home.

An Initial Comparison Between My New Lowden S-50 to the Older F-50

George Lowden in his shop in Northern Ireland

I drove into Southern Pines with a large bodied Lowden guitar, built with Cocobolo on the sides and Lutz Spruce on the top. Later, I returned home with a smaller bodied Lowden guitar with Cocobolo back and sides and Sinker Redwood on top. Obviously, a tonal variation would be expected based on size and wood differences between the old and new guitars.

On the other hand, a key commonality between the two guitars was Lowden artisanship. Lowden guitars are exquisite instruments that are aesthetically pleasing to the eye and made with obsessive attention to detail, which is why they’re expensive. According to George Lowden, what might appear to be small trifling details in guitar manufacturing, add up over the course of the build, finally making a considerable impact on the instrument’s performance. In addition, both guitars were designated style “50” models, which means they were built with the very best master grade tone woods in the Lowden inventory.

Partial bracing pattern under the sound board with example of dolphin shaping

Both of the Lowdens were braced similarly with what is referred to as an “A-frame” design. According to Lowden, the A-frame design stiffens the guitar around the sound hole and up through the neck so no sound is lost to unnecessary movement, but leaves the lower bout to vibrate freely, which creates the guitar’s sound. The braces themselves, which support the sound board, are individually hand carved in the form of a dolphin cresting the waves to give maximum stiffness with minimum mass for efficient sound transmission. As a result, Lowden guitars are known throughout the industry as being exceptionally powerful with extraordinary sustain. In other words, with a Lowden it is possible to get a loud sound without having to work the guitar hard and the sound lasts or sustains for a long time. It’s quite marvelous to behold when you strum a Lowden or pluck an individual string.

Other common design features between the two Lowden’s are the headstock, neck construction and neck join to the body of the guitar. The headstock of both guitars is similarly sized, shaped, and adorned with an attractive veneer on both sides, though the veneer differs between the two guitars. It’s a bit of a mystery what the wood veneer is on the newer S-50, but I suspect it is Sinker Redwood to match the guitar’s top. The tuners are Gotoh 510’s with Ebony buttons. There are lots of effective guitar tuners out in the world, but the high-tuning-ratio Gotoh 510’s are, in my judgement, the best. While they probably are not congruent with the aesthetic of a traditional (Martin-like) guitar, for a “contemporary” guitar like the Lowden, they are a perfect complement.

Lowden five piece neck and dovetail join to the body

Both the S-50 and the F-50 were built with a five piece mahogany and rosewood laminated neck, which lends to stability and resistance to twisting torque. I’ve owned a guitar with a twisted neck and it’s not pretty. A twisted neck will render a guitar largely unplayable.

The necks of the Lowden F and S models are joined at the body with a traditional dovetail join “which offers excellent transfer of vibrations from the neck to the body due to the tight fit, producing a warm, rich tone with good sustain, and offers tonal depth and resonance.” (ChatGPT)

Lowden S-50 with 12 fret neck, Ebony fretboard and Sinker Redwood soundboard

Finally, the S-50’s neck is built with an ebony fingerboard, but unlike the F-50, the newer guitar has an old school, more traditional 12 fret length, generally offering a warmer, fuller tone, which is what I was looking for in the F-50’s replacement. With 12 frets as opposed to the more common 14, the bridge is closer to the center of the lower bout, where the soundboard is more flexible, enhancing bass response and overall resonance. Further, in theory, the shorter scale length should make it easier to play.

In sum both guitars, the one I traded off, and the new one I brought home were made with the highest level of attention to detail, as well as the characteristic Lowden design features such as the rigid neck, dovetail joint and their idiosyncratic soundboard bracing. All the aforementioned result in both power and sustain, which are incredibly important attributes of an acoustic guitar. What differed between the two guitars and why I selected the new one over the old was the guitar’s tone character and playability, which is a function of design differences like the number of neck frets, scale length, guitar size, and selection of woods on the top, back and sides.

Below is an excellent video of a seminar held by George Lowden where you can hear, first hand, his design philosophy in his own words:

The Lowden S-50’s Playability

Compared to the F model, the S model is smaller in both width (approximately 1 inch) and depth (approximately 0.5 inches), making it more intimate and easier to handle, especially for fingerstyle playing. In other words there’s far less effort to wrap my arm around the guitar to get to the strings with my right hand.

Smaller guitars can run the risk of sounding boxy, but that is not the case of the S-50. It’s reasonably deep body, 12 fret design, and Lowden’s bracing method free the guitar’s body to push out sound like a cannon.

Similar to the F model that I traded in, the S model came from the factory with, for my taste, string action that was too high. The Lowden literature refers to the string height as middle low, which is anything but in my judgement. It’s not quite a cheese grater but it is too high for me to enjoy playing. It’s just too much work for me to fret the strings with the in-factory set height. My first two acoustic guitars were higher end Taylors and they had very low string action, so I’ve been spoiled ever since. I don’t own those Taylors anymore, but my ’37 Martin Authentic D-28 and my Santa Cruz H-13 both have low action and are a dream to play.

Brian McGee at Twin House Music in Carrboro, NC

I knew that I was going to have to get the guitar set up properly if I was ever going to enjoy playing it. As I recollect, back in the past with the F model, my luthier adjusted the neck relief only with the truss rod, which in the end was just not enough for me to feel comfortable playing it. This time I had to get it right! I was going to have to have the string action lowered more effectively then when I had the F model in the shop.

As preparation for the trip to my luthier, using a string height gauge, I measured the action of the Lowden S, the Santa Cruz and the Martin guitars that I owned. At the twelfth fret the Lowden’s 1st string was almost 1/3 a millimeter higher and the 6th string was 1/4 millimeter higher off the fret when compared to the Martin and Santa Cruz guitars. That’s an annoying difference that can be felt during play! Before taking the guitar to the shop, I actually contacted Lowden in Northern Ireland about any issues lowering the action, and they saw no reason to prohibit adjustment downwards. To them it was a matter of taste and they believed it was easier to drop string height than to raise it, which was why the action comes out of the factory a bit on the high side. Some players like it a bit high, but not me.

I took the Lowden into the shop at Twin House Music with the measurements I’d made and asked that the Lowden be adjusted to match my other guitars. Brian McGee, a great luthier, was initially reluctant to make the changes, being concerned about string buzz and also working with the Lowden split saddle. Most guitars have a single saddle, but the Lowden is split in two pieces to enhance intonation. Making action adjustments are more challenging with a split saddle because they have to be sanded down identically to avoid introducing unwanted intonation issues. I was really insistent and Brian finally agreed, and in the end he did a fantastic job. I’m now happy with the action on a Lowden guitar. Lowden’s do not have to be cheese graters!

The S-50’s Aesthetic and Tonal Character

A key determinant of an acoustic guitars aesthetic appearance and tonal character are the woods from which it is built. My Lowden is built with the master-grade tone woods of Sinker Redwood for the top and Cocobolo back and sides. Master-grade tonewood refers to the highest quality of wood used for crafting guitars and other musical instruments. It is a premium designation reserved for tonewoods that exhibit exceptional visual, structural, and acoustic qualities, making them ideal for producing high-end guitars.

Cocobolo

According to ChatGPT, Cocobolo (Dalbergia retusa) is a premium tonewood, often commanding higher prices due to its scarcity and desirability. It is visually stunning, featuring a variety of colors such as reddish-orange, deep browns, and even purples, often with dramatic grain patterns and black streaks. Cocobolo produces a lush, vibrant tone with pronounced overtones, offering a complex and harmonically rich sound. The treble response is bright and clear without being harsh, making it well-suited for fingerstyle playing. The low end is focused and powerful, providing a solid foundation without being muddy. While not overly pronounced, the midrange is clear and contributes to a well-rounded tonal palette. Its density and stiffness give it excellent projection and sustain, making it a favorite for players who want their sound to carry. Cocobolo excels in styles that require clarity and articulation, as it allows individual notes to ring out beautifully lending itself well to fingerstyle, which is how I play.

Cocobolo shares some tonal similarities with Indian and Brazilian Rosewood, such as a rich low end and sparkling highs, but it has more pronounced overtones and a slightly brighter overall character. While Mahogany has a warmer, more midrange-focused tone, Cocobolo offers more tonal complexity and dynamic range.

From a builders standpoint, Cocobolo is very oily and must be handled accordingly to ensure glue joints are sound and finishes remain intact. The dust from this wood can be obnoxious too, causing an allergic reaction during cutting. Of course, the oil and dust are not an issue with the finished consumer product.

Finally, from a sustainability standpoint Cocobolo is becoming less readily available because of unfortunate and unscrupulous over-harvesting. Only ten to twenty percent of Cocobolo harvest goes into musical instruments, including both guitars and woodwinds. On the other hand furniture, cabinetry, and flooring account for up to eighty percent. As the attack on Cocobolo sources continues, premium guitars made with it will be seen as rare heirloom instruments. My Cocobolo Lowden will be a guitar that goes on to my children after I’m gone, though I am dubious that they will understand what they have in hand. At that point, I probably won’t care.

Sinker Redwood

Probably the most remarkable aspect of the S-50 is its top, which is comprised of two book matched pieces of master grade Sinker Redwood. It’s my first experience with this type of soundboard where its reddish/brown hue, with vertical dark streaks embedded across the boards set it apart. My other acoustics have sunburst or standard unstained spruce tops, so the S-50 just looks different from typical acoustic guitars that I’ve owned in the past. The guitar is endlessly fascinating to behold.

As I said, my other acoustic guitars all have traditional spruce tops, though they are of varying subspecies, including Sitka, European, and Adirondack (Red Spruce), so from a sonic/tonal standpoint the S-50 stands apart. Generally speaking, Spruce offers a sound that is bright, clear, and dynamic, while Sinker Redwood is warm, rich, and overtone heavy, so there’s a nice difference in both appearance and sound that distinguishes the S-50, making it a great addition to my collection.

The origin story of Sinker Redwood is fascinating in and of itself. In the late 1800’s on into the early twentieth century, which was a time of rapid industrialization in the U.S., loggers harvested Northern California Giant Redwoods without abandon. These were old growth forests with trees as old as 1000 years. Sadly, only five percent of the original old growth forests remain, and they were saved by a combination of conservationists, activists and government intervention.

Harvesting of Giant Redwoods in Northern California

The trees situated along waterways were the easiest to manage as they could be dropped and floated downriver to the sawmills on the California coast. Along the way downriver, the trees were sometimes held back in large jams with the use of chain booms until the sawmills needed them. It was under those circumstances that some logs sank to the bottom of the river and became embedded in the river bottom mud never to make it down to the sawmills.

Redwoods making the trip downriver to the sawmills.

Submerged in anaerobic (oxygen-deprived) conditions for decades, perhaps some for a century, the sunken Redwood logs would undergo physical change. While submerged, Sinker Redwood logs absorb water, which, over time, leads to compression of the wood fibers enhancing the grain density. Also, logs that sank and remained submerged tended to have very tight grain patterns simply due to the slow-growing nature of the old growth trees from which they came. In addition, while submerged, the Sinker Redwood absorbed minerals from the surrounding water, which changed its color. The wood often took on rich, darker hues, ranging from deep reddish-brown to even greenish or purplish streaks, depending on the minerals present in the river water.

Sinker Redwood embedded in the river bottom in Northern California

Over time, submersion in water also leads to a breakdown of the wood’s structural components, lignin and cellulose, particularly in the outer layers. The cold and anaerobic conditions underwater slowed this breakdown process, allowing the core wood to remain structurally sound while developing unique tonal characteristics. This slight degradation can contribute to a smoother resonance when used in guitars, often resulting in warmer and more responsive sound.

Recovery of Sinker Redwood from rivers and estuaries in Northern California

Many years later at the close of the twentieth century entrepreneurs discovered and began recovering sunken Redwood logs from the rivers and estuaries in Northern California. Only the logs that had not rotted were of value, so recovery is a tedious, risky and expensive process. Since old growth redwood was so rare, the thinking was this recovered wood would have value in end-uses such as fine furniture, paneling, sculptures. Also as a function of its appearance and tonal properties, custom guitar builders and boutique luthiers adopted Sinker Redwood for high-end musical instruments.

Luthiers discovered the wonderful properties of Sinker Redwood tops in the early 2000’s.

Sinker Redwood Combined with Cocobolo

The combination of Sinker Redwood for the soundboard and Cocobolo for the back and sides on a small-bodied guitar creates a unique tonal palette. Both woods bring specific acoustic properties that complement one another beautifully, resulting in a guitar that is both visually striking and acoustically rich.

Sinker Redwood’s warmth and harmonic richness blend seamlessly with Cocobolo’s bright, articulate clarity, creating a balanced tone that is neither too warm nor overly bright. Sinker Redwood enhances responsiveness for nuanced playing, while Cocobolo’s density adds sustain and projection, even in a small-bodied guitar. Both woods have rich overtone profiles, resulting in a lush and dynamic sound with a natural reverb-like quality. The small body shape focuses the sound, while Cocobolo ensures that projection and presence aren’t sacrificed, even in a compact form.

Finally, the visual contrast between the richly colored Sinker Redwood top and the bold, exotic Cocobolo back and sides enhances the guitar’s aesthetic appeal, making it a showpiece as well as a fine musical instrument.

Comments On Some Aesthetic Appointments

There was a time when I believed that one should aspire to own the blingiest guitar possible, with abalone adornments and inlays galore like Gene Autry’s famous decked-out Martin D-45. In fact the very first really upper end guitar I ever purchased was a Taylor 914, which was loaded with glitz. Eventually, after playing incredible sounding but relatively unadorned guitars like my Martin, Collings and Santa Cruz instruments, I realized that the wood, the build quality and the tonal output far outweighed the importance of external appearance enhanced by inlays and other doodads..

Singing Cowboy with highly adorned guitar

By most accounts George Lowden also thinks that an overly-ornamented guitar is not a particularly important design philosophy. Besides the classic dimension of the instrument, the preponderance of Lowden guitars are tastefully simple in surface appearance. The tone woods, the wood bindings and the purflings contribute to an elegantly simple appearance.

One of more extravagant touches on a Lowden S-50 guitar is the abalone and figured wood sound hole rosette. It’s really quite beautiful in person.

Final Comments

I put pickups in all my acoustic guitars. I like playing the guitar plugged into an acoustic amplifier (Genzler Acoustic Array Pro) facing me so that I can appreciate the output of the guitar. I use K&K Pure Mini pickups exclusively because they sound natural and don’t require a lot of fiddling, although an acoustic DI like an LR Baggs Venue is very helpful in the signal chain, which I have on my acoustic guitar pedalboard.

The K&K Pure Mini is a snap to place in an acoustic guitar with a pinned bridge. Two of the pin holes are used to accurately place the pickup under the bridge with the use of a jig that K&K supplies in the box. A pinless bridge like the Lowden is built with is a more challenging installation. If you follow the K&K instructions, it requires drilling two small holes underneath the saddle. This is not for the faint of heart. My luthier cleared it with me and followed the instructions, including drilling the holes. The installation is perfect and the pickup works flawlessly. I wish I could have said the same for the F-50’s installation. I don’t think it was done quite right, as I had to really boost the gain to get the pickup to function at all, which was another irritant about that guitar.

Some Sound Samples

I am embedding a couple of sound samples from YouTube. The first is Baxter Clement from Casino Guitars playing the exact model guitar I purchased from him, but this was one he had in stock several years before mine arrived. Note Baxter plays with a plectrum, which I do not. He is a very accomplished musician, much more so than me:

Below is a video produced by Heart Breaker Guitars, a dealer of fine guitars and a major supplier of Lowdens in the U.S. After a brief introduction, Mike Romano plays an S-35, very similar to the S-50, with the woods the same but maybe not quite as choice. Mr. Romano plays finger style and he’s quite good.

Here’s a sample of me playing my S-50 through a Shure mic that’s designed to interface with the iPhone that’s doing the filming. As a result there are limits to fidelity. To boost it a bit, I am running the guitar through my Genzler Acoustic Array Amplifier and my pedal board. I am playing the Mississippi John Hurt classic, Spike Driver Blues.

Here’s another sample. This is Townes Van Zandt’s instrumental arrangement of the Rolling Stones tune Dead Flowers:

Finally, here’s the instrumental arrangement for Taj Mahal’s Queen Bee:

A note of thanks to ChatGPT for help with questions about woods and some history, and for the creation of support illustrations.

September 17, 2023February 7, 2024

An Irish Guitar Joins the Stable – I Review My Lowden F-50

Introduction

It was a confluence of events and cognitions that lead me down the path to purchase a different new guitar. First, I was becoming increasingly disaffected with my Collings 0002H. It was an excellent instrument that sounded great and it was my first Collings, which made it special; however, the guitar was, from the very moment I started playing it at home, difficult to play.

There are things about the playability of a guitar that sometimes elude me in the store when excitement overrides critical assessment. Or, perhaps it’s the change in ambient environment when the guitar arrives at home that causes the guitar neck to shift around and alter the instruments action. At any rate, It was just hard on my hands and more of a challenge to play when compared to my other guitars, including my Martin D-28 Authentic, the Collings C10-35, and my recently purchased Santa Cruz H-13. The playability issues continued despite having a shop luthier at Dave’s Guitars do a full set-up some weeks later. In sum, I was not playing it very much, so I knew in my heart of hearts that it had to eventually go.

Further, the 0002H was constructed with a Sitka spruce top and East Indian Rosewood back and sides which is fine; however, my Martin ’37 Authentic is composed of an Adirondack spruce top and Madagascar Rosewood back and sides which is arguably a more choice version of the Spruce and Rosewood combination. While it’s worth repeating that the 0002H was a marvelous sounding guitar, it did not compare to the incredible sounding Martin on the level of playability and wood quality (splitting hair here), so it became an ever so slightly “less than” and redundant guitar in my stable, leaving it in the category of high trade potential.

My thinking was that If I were to trade the 0002H it would be for a guitar with a wood combination and body shape that I did not already possess. One of the guitar manufacturers that I was particularly interested in was the Irish company Lowden. Many years ago I had owned an all Koa Lowden guitar that was quite beautiful, but I traded it off because the neck was a bit narrow for finger-style guitar which I’d recently adopted. Over the years I regretted parting with it.

Lowden manufactures guitars in a small shop in Northern Ireland with great individual care. George Lowden was in the same mid-century generation of successful guitar builders who started from the ground up decades ago with their own idiosyncratic approach to constructing the instruments. This would include builders like Richard Hoover of Santa Cruz, Bill Collings, and Bob Taylor.

There were no Lowden sellers in Iowa where I was residing and I was not interested in purchasing one online without trying it out. Further, I was totally unsure of which particular Lowden I was interested in. I wanted to visit a location where I could try a variety of them. I knew, for example, that Casino Guitars in Southern Pines, North Carolina was a major dealer in Lowden Guitars. I was familiar with Casino Guitars because the owner, Baxter Clement, was a highly visible Youtube personality uploading several videos every week about different aspects regarding guitars and the associated industry. Baxter was an advocate for Lowden instruments and offered a healthy variety of them in stock. Below you can watch one of Baxter’s videos about his commitment to Lowden guitars.

Baxter Clement in his store, Casino Guitars in Southern Pines, NC

While my thoughts about guitars in general, Lowden’s in particular, and trading the 0002H were percolating somewhere in the back of my mind, my wife Annette and I decided to move from Iowa to North Carolina. The state of North Carolina has a strong pull on my life. It’s where I came of age decades ago, having graduated from High School in Durham and then subsequently completed undergraduate degrees at both the University of North Carolina and NC State. We were both retired and thought it was the right time for a change of venue. We had multiple children and grandchildren who lived in NC and we were both worn down by the long and brutal Iowa winters. So, we purchased a new home outside Chapel Hill, NC, sold our Iowa home, packed up and settled into NC in early June of 2023.

Casino Guitars

I think it was as early as the second weekend that we were living in North Carolina that we planned to head to the coast to visit one of my daughters and her family. I decided that we would leave earlier then necessary and take a side trip to Casino Guitars in Southern Pines on the way to Wilmington, NC. While I was not planning on buying a guitar on this particular visit, I packed the 0002H in the event that I wished to make a trade on a guitar that I liked.

An hour away from my home, Casino Guitars is located right in the heart of the Southern Pines historic downtown district. The building itself was, back in the day, a casino, bowling alley, speakeasy and a brothel. Baxter Clement, a Southern Pines native recently renovated the building, built an apartment for his family on the second floor and established his guitar retail space on the main floor. As you can see from the images below, the shop is well stocked with premium electric and acoustic guitars, including PRS, Fender, Gretsch, Martin, Taylor and of course, Lowden. Besides the awesome inventory, the interior space is absolutely stunning. Just a great place to be!

I was lucky to find a parking space reasonably close to the store because Southern Pines was mobbed with visitors there to attend a concert that night. Leaving Annette and our dog Nike at an Ice Cream parlor, I crossed the railroad tracks that cut through the center of town and eventually found the store, which delighted me! When I entered the shop, a fellow I did not recognize from Youtube videos was manning the main desk. I later learned that he was was James Villone. Since the shop was pretty quiet at that moment James was kind enough to quickly show me the way to the Lowden’s.

Initially, James thought the only store inventory was the three Lowden’s in the glass cases. I was a little disappointed at first but thought, “what the hell,” I ‘d give those three a try out. James pulled out all three Lowden’s and brought them to this lovely audition room in the back portion of the shop. While I was playing the first one, James went out, at my request, to find me a music stand so I could play some tunes off of my iPad Pro.

Not long after, just as I looked up from my music, Baxter Clement burst into the audition room! I was delighted to finally meet him after seeing him with my morning coffee for several years. He was every bit as fun, affable and accessible as he seemed on his Youtube videos and like magic, he filled the room with Lowden guitars that he produced from his inventory hidden somewhere in the shop. He walked me through the different Lowden styles and produced various wood combinations for me to give a go. I was particularly interested in playing a guitar with a Cedar top because I’d owned a Taylor years ago with a Cedar top and I liked its warm sound; however, the Cedar topped Lowden’s on that particular morning did not work for me enough to get seriously interested in a purchase.

Undaunted, Baxter kept showing me additional Lowden’s of various wood combinations and sizes; however, after playing numerous guitars, I was about to give up, collect my wife and dog and head to Wilmington. Then finally, he dropped a Lowden constructed with Cocobolo back and sides and a Lutz Spruce top into my lap and it was magic to my ears as compared to all the others I’d played. It was a style F-50, which I would learn later meant the guitar was made from all master grade tone woods, which are the best of the best tone woods available anywhere, chosen for their exceptional tonal and visual properties!

I played the F-50 for quite a while, including some tunes with Baxter accompanying me, which delighted me to no end. Later, I met his wife, Taylor, and one of his sons. At Taylor’s behest, Annette and Nike were even invited into the shop. The whole experience was quite marvelous. Sometime thereafter we made a deal, which included a trade on the 0002H. Baxter even carried and then packed the Lowden F-50 into my car, and after farewells we headed out for a weekend in Wilmington.

I Review My Lowden F-50 Cocobolo and Lutz Spruce

My First Impressions

Much to my regret, my earliest experiences with the newly purchased F-50 were somewhat dismal. It began when I arrived in Wilmington to visit my daughter, Sally. Having just purchased the Lowden, I travelled cross state with the guitar from Southern Pines. After settling in at Sally’s, I disappeared upstairs to the guest bedroom and pulled the F-50 from its case and right away, despite the guitar still sounding great, I noticed the action was far higher than I’d observed during the Casino shop audition. In fact, the guitar was quite difficult to play, particularly in the treble section. Had my enthusiasm in the store again overridden my ability to critically analyze the guitar’s playability? On the other hand, was the Lowden exceptionally sensitive to ambient conditions and did the neck start shifting around? It should be noted that I keep D’Addario moisture packs in the guitar case, so my attempt to control guitar conditioning was functioning during the drive.

When I got back home, I measured the string height distance from the frets and observed that the the guitar was out of specification on the high side across the fretboard, this being based upon data from the Lowden website. I was subsequently welcomed back by Casino Guitars for an adjustment and returned a few days later. Sean Diesfield, Casino’s resident guitar whisperer did some work on the saddles and the neck relief and sent me on my way. At the shop the guitar seemed improved, but when I got home and played the instrument at length it was somewhat better but not good enough.

At this point I was suffering some major buyer’s remorse! Did I trade the Collings 0002H because it was a pain in the ass to play for a different guitar that might, in fact, be a worse pain in the ass to play? At that moment it seemed so.

Rather than give up, I decided to find a local skilled luthier who could give me a full set-up and lower the string action to my comfort level. That was easier said than done. Though there were a number of “repair” luthiers in town, they were either booked up for months, non responsive to my request, or occupied with life trauma and unavailable. I finally left the Lowden for over two weeks at my local shop, Twin House Music, where I take lessons and and a couple of luthiers (including the owner) do their magic. Eventually the Lowden was properly cared for. In the end, the neck relief was adjusted and the guitar now plays as well as any other in my collection! In the past, I’ve adjusted the neck relief on many of my guitars, but in the case of the Lowden, the adjustment is very difficult to make and requires a tool that I did not possess. Further, I thought the guitar had more serious problems than neck relief. At any rate, badda bing, badda boom, the guitar is great now!

The Twin House Music owner and luthier, Brian McGee, who tamed the Lowden

In the end, I don’t know how to account for the difficulties I had getting the guitar to a state of acceptable playability. Perhaps Lowden’s are more sensitive to ambient conditions? Was it the long voyage from Northern Ireland to the U.S. that caused the neck to shift? Why did I not notice the guitar’s issues when I tried it out in the store? Did the guitar’s action shift between Southern Pines and Wilmington? On Lowden’s website, they are clear to point out that a new guitar will settle-in during the first months of playing and would probably require adjustment. There is no truer statement than that!

Basic Lowden Observations

Lowden builds three basic guitar shapes with the F being their middle size between the Jumbo O and the smaller S. Originally designed to compete in the flat-picking market, the F guitar is now favored by finger-stylists too, hence my interest. For example, world renowned finger-stylist Pierre Bensusan plays an F shaped signature Lowden.

Lowden builds the F style with a variety of wood combinations. According to Lowden specifications, the 50 designation means that the woods used to construct this F shaped guitar are the best of the best that the company acquires, being selected out for a combination of tonality and appearance. In my case, the guitar body is topped with Lutz, which is a hybrid White and Sitka Spruce, characterized by a light creamy color with a very tight grain. On the other hand, Cocobolo is used for the back and sides with a showy reddish color and swirly grain lines.

According to one leading U.S. guitar manufacturer, “in terms of acoustic response, Lutz blends the positive characteristics of Sitka and White spruce and its close cousin, Engelmann. Lutz tends to exhibit characteristics of Adirondack spruce. The result is powerful sonic horsepower that translates into strong volume, projection and tonal richness.”

The back and sides of the body are composed of Cocobolo, a member of the Dalbergia species, which includes other various Rosewoods. According to the aforementioned U.S. manufacturer, “Cocobolo is a dense, stiff tropical hardwood from Mexico, which produces a fairly bright overall tone emphasized by sparkling treble notes. The tone is fast, responsive, and articulate.” Cocobolo is a substantial, heavy and oily wood that requires skill and competence to draw out its potential as a guitar tone wood; however, when it is properly deployed Cocobolo has been described as “Brazilian on steroids!”

Cocobolo backside of the F-50, note the characteristic blond sapwood section down the back’s center

Below is a video in which a luthier interacts with a sample of Cocobolo tone wood:

Below, George Lowden discusses various types of tone woods that he’s used for guitar building. While he briefly describes Cocobolo, he seems more enthusiastic with back and side woods like Walnut, Honduran Rosewood and especially African Blackwood:

Perhaps a more uplifting analysis of Cocobolo is given by the incomparable Lindsay Straw for the North American Guitar:

In the end, George Lowden says play the guitar and choose the one that speaks best to you, which is what I did when I chose Cocobolo from the crowd of Lowden’s at Casino Guitars.

To me, my F-50 is an example of high craft and understated physical beauty. The ratio of upper and lower bout sizes combined with the curvy narrow waist and sloped shoulders speak to classical Greek proportions. The satin matte finish, the understated wood bindings, the lack of decor on the fretboard and the dark veneered headstock create a sense of elegance without the gaudiness that some high end guitars self-consciously display. The figured koa/abalone rosette is a tasteful embellishment, but also holds back visually enough to avoid seeming overdone.

Other Aesthetic and Structural Features of the F-50

The Lowden paddle-type headstock has a handsome dark Ebony veneer on the face and backstrap with the brand logo inlaid top front. The tuners are the most excellent Gotoh Gold 510’s with Ebony buttons. I’ve owned several guitars in the past that were equipped with Gotoh’s. My current other acoustics are inspired by vintage Martin and Gibson guitars so they’re equipped with Waverly tuners, which are nice, but not near as supple as the Gotoh’s. I am delighted to have a guitar again with Gotoh’s. They tune like butter. As far as the nut goes, it was unclear to me based on the paucity of specs available on the Lowden website what it’s made of; however, Lowden’s website has a nice chat function and their tech rep, Simon, confirmed that bone is used, which is not surprising given the general excellence of the F-50.

I own 5 other guitars with varying neck profiles, and I am not that particular about the neck shapes other than by using it, it must not stress my old hands. Lowden is not forthcoming in their specs about their neck shape; however, I find it full-in-hand, and comfortable to play as it’s not too clubby or too thin. The neck is a five piece composite of Mahogany and Rosewood while the necks on my other axes are all solid wood, so the Lowden by comparison is somewhat exotic looking. Further, the five piece neck is theoretically more stable and less likely to twist over time. I had a Taylor solid body at one time with a twisted neck and it was ugly; fortunately, Taylor generously replaced the neck, but that’s another story. Finally, unlike the satin matte finish on the body of the Lowden, the neck has a glossier surface making it quite easy to move up and down while playing.

You can see the aesthetically pleasing “hockey stick” sweep of the Rosewood section embedded in the mahogany at the base of the neck. Again, it is hard to find out all the construction details on the Lowden website, but I am pretty sure that the neck is attached to the body with a traditional dovetail join. Also visible in the associated image is the contrast of the glossy neck versus the satin matte finish on the body, the figured Koa binding and backstrip, the beautiful wood grain striations in the Cocobolo, and finally the section of blonde sapwood running up the center back of the guitar.

To the right, you can see a section of the Ebony fingerboard with its Maple bindings. No blond streaks on the F-50’s fingerboard, with Lowden choosing only the most select all black Ebony wood for their Mastergrade model. The fingerboard extends into the sound hole to catch the highest possible treble notes, a place that I will probably never travel with my fingers. Nevertheless it is an aesthetically pleasing visual design feature. You can also see the unique and stunning sound hole rosette which is figured Koa and Abalone.

Unlike my other acoustic guitars which all have pinned bridges and one piece saddles, the F-50 and all other Lowdens are built with pinless bridges and compensated two-piece saddles. Put several guitarists in a room and they’ll debate the merits of pin vs pinless bridges. In my experience both approaches work fine. The pinless bridge makes for an attractive surface element on the guitar and certainly simplifies restringing although care should be taken to avoid having the string ball end slapping down onto the soundboard and dinging it during insertion through the bridge. Because the slap-down is almost inevitable, Lowden supplies a nifty little cardboard insert to slide beneath the bridge to protect the soundboard during stringing.

Finally the bottom of the lower bout can be seen on the right. Again, the wonderful Cocobolo grain patterns can be seen as well as a strip of figured Koa where the two side pieces meet. You’ll note a K&K Pure Mini jack installed at my request by the kind folks at Casino Guitars. I use this pickup on all my acoustics as it’s neat, simple and the amplified guitar sounds natural to my ears. If you’re interested in my tech for amplification you can click here.

To Sum it Up

Despite my initial buyer’s remorse before the F-50 was given a pro set up, this guitar is a real keeper! It is beautifully constructed, quite comfortable to handle and play, and the sonic palette available from this instrument is, as I had hoped, distinctly different from my other acoustic guitars. The body woods of Cocobolo and Lutz Spruce combined with Lowden’s exacting construction methods (of which they are quite mysterious) creates clean punchy bass tones, bell-chime like trebles with underlying warm overtones with tonal sustain that exceeds the eternal.

After I wrote this piece, Peach Guitars released a video in which some nice Lowden construction details are considered, particularly how the soundboard is manufactured:

For someone primarily used to Sitka Spruce combinations with Mahogany or the more accessible Rosewoods (but not unobtainium like Brazilian), a body of Cocobolo and Lutz is a nice stretch to something significantly different, but without being too exotic like Macassar Ebony or African Blackwood.

Tone Examples

I’ve reviewed several guitars on this website, but have never had the availability of linking to a Youtube video of my guitar being demonstrated; however, in this case Casino Guitars recorded a gentleman playing my F-50, which I show below:

I will also include a clip of me playing the F-50 also. What would be more appropriate than playing a selection of Piedmont Finger-Style Blues since I now reside in the Piedmont of North Carolina. This tune is credited to one of the most recognized and highly regarded Piedmont Blues players, Etta Baker entitled Carolina Breakdown!

Etta Baker’s Piedmont Blues: Carolina Breakdown

November 25, 2021October 1, 2023

Reviewing the Collings 0002H: Acoustic Guitar as Industrial Art

There is a road, no simple highway
Between the dawn and the dark of night
And if you go, no one may follow
That path is for your steps alone
— The Grateful Dead

Introduction

Playing a Collings at my first official gig…

I’m not getting any younger and this past summer I entered my 7th decade. A couple of years ago when I embarked on retirement, my fund manager/guide offered me sage advice when he bade me not to wait too late to experience what I wished to (within reason).

To those who know me and others who’ve read this weblog, it is patently obvious that as a pensioner, I’ve pretty much devoted my efforts to developing myself as a musician/guitarist. While I’ve made tangible progress in my pursuit, there really is no end to the path I’m on… the guitar is an insatiable instrument with unlimited expectations for its players, and it will carry me to the end…

As a dedicated guitarist, I aspire to play the finest instruments that can be acquired within reason. In the past I’ve found that the best way to keep things within reason is to trade/sell an existing instrument(s) against the acquisition of another better one, which happens to be a common behavior among many guitar players! About a year ago, I traded two Taylor electric guitars for a Collings I-35 electric guitar (reviewed here). When evaluating the I-35, I became enchanted with the founder of the company. He was a singular, creative, precision driven engineer and world class manufacturing leader in the marketplace of guitars. As a result, I developed an interest in eventually adding a Collings acoustic guitar to my stable. Below is a brief video about this man, the late Bill Collings:

You can break down guitar building into two basic categories: factory versus luthier built. That’s not to say that some factories do not employ luthier quality builders, but the term luthier built suggests an individual who designs and assembles a guitar in a private shop from soup to nuts… i.e raw wood to finished product.

Somogyi’s excellent book on guitar design

One of the most highly regarded luthiers in the U.S. is Ervin Somogyi, whose exceptional book on acoustic guitar design I purchased and perused a couple of years ago. Most of Somogyi’s guitars are museum pieces that command staggering sums and are really built for well-financed private customers. Somogyi applies his skills to extract maximum sonic performance from wood and steel, and his embellishments often rise to high art. Somogyi is also a bit dubious about many but not all of the other independent luthiers practicing in the U.S. He pretty much says in his book that just because a person can build a guitar from scratch does not guarantee it will be a high quality instrument. Results will vary widely from builder to builder, so he says be wary of in the luthier marketplace. I simply do not trust that I have the wherewithal to distinguish a high quality luthier produced guitar from a run of the mill one. Consequently I stick with recognized factory built instruments because of their long history of essentially decent performance.

The preponderance of guitars in the U.S. are built in factories of varying sizes with wide ranging production capacities, specifications, price points, manufacturing philosophies and subsequent qualities. In the U.S. Taylor, Martin and Gibson are excellent examples of the larger decent quality guitar producers. It’s hard to go wrong buying a guitar from those manufacturers, though it is important to be aware there is some product to product variability in performance simply because the guitars are built from wood which is a naturally variable material. In other words, these manufactures build, on average, decent instruments; however, within each companies productions some guitars may be better and some not as good.

Purchase choices are often based on taste and/or tradition-based brand loyalty. For example, I’ve owned several Taylor guitars because I liked their playability and voicing, whereas neither Martin nor Gibson ever appealed that much to me. I know other players who would never consider any guitar other than a Martin.

Besides the big companies, there are a host of smaller factory producers, such as Santa Cruz, Breedlove, Bourgeois and Collings who produce limited numbers of instruments mostly because of the care, materials, embellishments and extra labor they apply to perfect their products. Sometimes these smaller companies are referred to as “boutique” manufacturers.

Here’s a brief video that speaks to Collings manufacturing excellence:

Choosing among the small manufacturers is largely a matter of expendable income, taste and knowledge of the company’s specific products. Product accessibility may also be one of the most important variables. In fact, I’ve never actually seen a Santa Cruz, Breedlove or Bourgeois guitar in any of the stores I’ve ever frequented. I suppose I could acquire a boutique guitar online, but I would not want to spend that kind of money without trying the instrument out myself beforehand. I’ve had mixed experiences buying online. Having the ability to trade for the purchase was also a prerequisite for me, and that’s difficult to do online.

Unlike the other small builders, I’ve had some access to Collings acoustic guitars in nearby Wisconsin at Dave’s Guitars. I auditioned several of them a few months ago and thought they were decent, but still reserved judgment until I could A/B compare them to my current Taylor guitars. I still suspected that those guitars when compared to Taylors, Martins and Gibsons were a cut above, with their unique voicing (appealing to me), and build approaching the level of care and individuality claimed by independent luthiers. I intended to give Collings acoustics another visit in the future.

I Get Serious About Collings Acoustic Guitars

Last week, I finally said to myself, “the hell with it, I’m not getting any younger” and decided to see what kind of trade-in offer I could get from Dave’s Guitars for my 5 year old Taylor 812ce. Usually what triggers me is reading about a musician, near my age, who croaks for whatever reason.

I’d special ordered the Taylor 812ce through Bob’s Guitars in my home town. You’ll note in the image on the left, I ordered the guitar without a pick guard since I play finger-style. The Taylor was a good guitar and I enjoyed playing it. A few years ago, when I was changing the strings, I inadvertently knocked a chunk of wood off the bridge. Taylor Guitars was kind enough to replace the bridge under warrantee if I paid for the shipping. After repair the guitar looked the same, but it never sounded quite like it did originally. I don’t think it was my imagination.

in Dave’s parking lot with iconic signage…

Upon inspection of the guitar via photographs, Dave’s Guitars made me a modestly reasonable offer, which they improved upon later when I arrived at the store. One issue that irritated the hell out of me was Dave’s statement that X-braced non V-Class Taylor guitars now have reduced trade-in value. A few years back, Taylor Guitars redesigned their bracing system to a V shape, supported by a massive marketing campaign. I actually think the older guitars sound better, but it’s hard to fight the extraordinary power of Taylor marketing.

So, I loaded up my car with the Taylor 812, my iPad which contains all my music and a mic stand equipped with an iPad holder. It’s a long 2.5 hour trip through the hinterlands of Iowa and Minnesota until you finally traverse the Mississippi and enter the river town of LaCrosse, WI. Dave’s guitars is within spitting distance of the river itself. Below you can see of section of the Acoustic Guitar Room at Dave’s. They have a large showroom…

I arrived early enough to get plenty of time auditioning the Collings acoustics that were available in LaCrosse. I planned to A/B my Taylor with several of the Collings with a focus on 12 fret guitars with slot-heads, since that was what I was what my Taylor was. My other acoustic guitar that I am keeping is a Grand Concert sized, 14 fret, fancy-pants, fully decked out, Taylor 914ce. I wanted to make sure the Collings I selected would be distinctly different from the Taylor 914ce.

The Collings collection at Dave’s Guitars

To the right you can see the Collings section of Dave’s Guitars, which contained three 12 fretted, slot-head guitars. Two of those can be seen on the lower row on the far left and far right. The guitar on the left was a 02H Traditional with a sitka spruce top and Indian rosewood back and sides. The one on the right was a 0001 Custom made with all mahogany top and sides with a custom dog hair finish with Pearloid appointments. Not pictured is a 0002H with a sitka top and Indian rosewood back and sides. When I shot this image that guitar was being equipped with a pick-up because I intended to take it home.

When I auditioned the guitars, I sat down at the wall of Collings guitars on a comfortable stool and 90 minutes disappeared. I played all three of the slot head Collings, along with the Taylor 812ce side by side over and over again. It was absorbing and a lot of fun. The acoustic guitar room at Dave’s was quiet that morning, so I was able to give the guitars a nice listen to.

The 0002H was clearly the winner to my ears. The Taylor offered up nice clean and direct notes, but the 0002H played at a different level. Each note in comparison was almost 3 dimensional… in other words the notes bloomed outward. The 0002H presented more bottom, more punch and overtone. No contest… the Taylor was going on the trading block…

I gave the 02H a serious look, but it did not hold up when compared to the 0002H. I suspect there were a couple of variables at play here. First the 0002H as a larger lower bout which will make it louder and deeper sounding. Secondly, the Traditional series, as I understand it, was designed to be physically lighter and engineered to reduce overtones to give more clarity to individual notes. I can attest to the fact that the 02H was significantly lighter than the 0002H, to the point that handling it was a bit unnerving as it felt so insubstantial. In the end, I did not appreciate the individual note clarity. The guitar felt like it needed time to open up as it sounded thin and insubstantial when A/B’d with the 0002H. The 02H was far more expensive too. Move along… nothing to see here…

The all mahogany 0002 custom was quite an amazing looking guitar with it’s white pearloid headstock and pick guard contrasted with the blackened dog hair finish. It would be a crowd pleasing guitar based simply on appearance. It was the most expensive guitar by a long shot that I auditioned that day. I might have stretched for it had it sounded unbelievable, but the solid mahogany body just did not have the presence of the 0002H. Perhaps in time the mahogany would open up, but I did not have the patience to wait several years for that possibility. I kept going back to the 0002H after playing all the guitars several times over and decided to acquire it.

I carried the Taylor and the Collings 0002H to my store guy friend JR and closed the deal. When queried about installing a pickup, JR was emphatic that the K&K Pure Mini, a passive device, was the best choice. The Pure Mini is a simple 3 transducer pickup that mounts on the bridge plate inside the guitar. I went with his advice and was amazed at how natural sounding it was when I finally got a chance to plug in the guitar at home later that day.

JR behind the acoustic guitar desk and Dave’s Guitars closing the deal…

Reviewing In Detail My 0002H

Below is my 0002H resting comfortably in its TKL hard case, which was sourced out by Collings because they do not make their own cases. They dabbled with producing cases at one point in the past, but it was unsustainably expensive, so they quit. The interior of the TKL case is decked out in the interior with form-fitting cushions, covered with a dark green velveteen fabric. The fit is tight and requires a light pushdown by hand to get the guitar properly seated. The case clasps function well, and one is lockable. Inside the case was the key, a Collings micro-fiber wiping cloth, the warrantee registration form (which can alternatively be done online) and a pressure sensitive Collings sticker!

A different view of the 0002H out of its case is on the right. You’ll note that it has an upper bout just shy of 10 inches wide, a narrow waist, and a largish 15 inch lower bout. The body length is just a little over 20 inches. The appearance evokes and older era and should be no surprise because this shape, originated by C.F. Martin is rooted in the very early 1900’s.

The narrow waist allows the guitar to fit in the lap very comfortably while playing in the sitting position, which is what I prefer. The combined upper and lower bout size difference creates a pleasant evenly balanced volume of tones, with plenty of low end to avoid thinness in output.

Again, the guitar is a 12 fret model with a slot head. The top is sitka spruce with back and sides being East Indian rosewood.

Starting at the top of the guitar, you can see below front and rear views of the headstock.

The headstock has a very pleasant “exotic” ebony veneer with a Mother-of-Pearl Collings logo inlay. I always found the excessively shiny veneer on the Taylor 812ce incongruous and not aesthetically in tune with the rest of the guitar. The Collings headstock just looks better. You might note too at the lower portion of the rear of the headstock is an embellishing pyramidal carving referred to as a volute.

The Waverly tuners are excellent and work far better than the Taylor tuners. Their turning action is reminiscent of the excellent Gotoh tuners I have on three other guitars. I am pleased that the Collings tuners are nickel because the Taylor ivoroid tuners can fall apart when using a mechanized winder for string changing.

Proper string wrapping on the Collings Slotted Headstock

When I had the K&K Pure Mini pick-up installed in the 0002H, the shop replaced the Collings spec’d D’Addario EJ-16 (.012″- .053″) strings with Elixirs of the same gauge. I observed two things when I got home with the restrung guitar. First, the string wrap on the peghead was done in a manner such that the lowest strings (the E strings) on both sides were in contact with the headstock wood which will quickly wear away the finish. To avoid this deleterious situation, the E strings should be wound on with one wrap to the outside and the remainder towards the inside. This wind does cause the E strings to take a sharp angle inwards, but they will now avoid contacting the wood. Examination of photos on the Collings website also indicate that all the strings are wound outside-in, which is unlike the winds used by Taylor and National on their slot heads.

The second thing I noticed was that the Elixir strings were far stiffer to play on this guitar than the D’Addarios, making it far less enjoyable to play. I also found the sound of the guitar adversely affected too, so as soon as I could I restrung the guitar with the original spec’d D’Addarios! Perhaps the strings won’t last as long, but now the guitar sounds and plays like the one I auditioned in the store. This was an odd experience for me because I’ve used Elixirs on my Taylor acoustics without any difficulty. Of course, for what its worth, Taylors are spec’d to play with Elixirs

The neck is Honduran Mahogany and the fretboard is stained ebony. There is no binding on the neck and the fingerboard is marked with elegant but simple Abalone short diamond and square designs.

The neck has taken some getting used too because it is a bit chunkier than a Taylor acoustic’s neck and it is the widest necked guitar I ever owned coming in at 1 & 13/16 of an inch. That’s a lot of real estate to cover and requires some readjustment of finger muscle memory. All good for finger style playing though.

Below you can see an image of the the back of the neck where it attaches to the guitar body. The neck has a lovely gloss finish that allows easy mobility of the left hand up and down the fretboard

Also visible on the left is the Ivoroid binding at the seam of the back and sides of the guitar as well as the grained Ivoroid cap on the neck base. The neck is a modified V-shape and compounded in circumference, widening outwards at the 9th fret. As I understand it the neck flattens out towards the body of the guitar which makes playing the higher notes in the region easier.

Collings employs a mortise & tenon hybrid attachment of neck to body. I am assuming this form of bolt on neck makes it easier to repair or replace the guitar’s neck. There’s some belief among guitar aficionados and builders that a dovetail join is the only way to attach a neck to a guitar’s body. In my judgement Taylor guitars proved that assertion wrong a long time ago.

The photo above and to the right show the East Indian Rosewood that comprises the back and sides of the 0002H. Collings builds their reputation on using the choicest tone woods for their instruments. The rosewood is straight-grained and a lovely deep brown with lighter streaking. The color is so deep it almost looks purple depending upon the light. Note too above the “zipper” backstrip that runs down the center of the guitar back. It’s quite striking.

I’ve tried lots of different tone wood combinations; however, I keep coming back to sitka spruce tops with rosewood back and sides as the classic combination that is most appealing to me ears.

The 000 sized Collings come in 3 basic styles, not including the wide variety of custom work they also offer. My 000 has the 2H designation, which basically means that it has some fancier appointments than the style 1, including the nice zipper backstrip, the geometric fretboard inlays, and most importantly the herringbone binding, which is a classic steel string acoustic guitar appointment.

To the right, you can see the sound hole section of the 0002H, with its elegant but not overly fancy rosette, which brings me to a point about the 0002H compared to the Taylor 812ce that I traded-in when I purchased the Collings. To be perfectly frank, the Taylor possessed a fancier level of appointment, including beautiful maple wood bindings, an abalone rosette with an inner sound hole maple border, and a more intricate fretboard inlay, all of it tastefully done and costing far less. But, and this is a big but, the Collings design, tonality, playability, and its visible connection to the past origins of guitar design make it a palpably singular instrument to own and play.

I’m not a big fan of pickguards as I play strictly finger style and I suspect they have some minor tone dampening impact on the guitar’s sound board. Had I the opportunity, I would have acquired the 0002H without a pickguard. Nevertheless, the 0002H I purchased from Dave’s Guitars had a pickguard, and you cannot remove one without the high probability of damaging the finish. I did note that the pickguard was pretty scratched up. I think the guitar had been there for at least a year and tested out by a number of people, including some careless assholes with a picks. My store guy, J.R. said that was no problem because they would buff out the scratches in their shop, which they did. The pickguard looks pristine now. I do not recollect how translucent it was before buffing, but now I notice the sound hole rosette grinning through the guard. After a query on Facebook, some other Collings owners suggested to me that it was always translucent.

In the above image, you may also note the nice, even tight grain on the sitka spruce soundboard. This is what Collings brings to the marketplace: the very best available tone woods.

Beneath the sound hole is the bridge section. The 0002H uses an ebony pyramid bridge, a design that harkens back to the 1800’s and some of the earliest Martin guitars. The bridge pins are unslotted, which some argue is a more robust design. I guess that may also be a vintage appointment. Residing in the bridge is a bone saddle which complements the bone nut back up the neck.

Iconic Collings label inside the sound hole!

To sum it up, I am delighted and it is my great, good fortune that I have the opportunity to play a guitar of such character and build!

Add-ons

I needed a pick-up installed to be able to plug my guitar into my portable PA (Bose L1 Pro 32) and into other sound systems around town. This is because I host Open Mic Night once per month at a Coffee Shop, sometimes play other Open Mic Nights in town and do a rare coffee shop gig on my own.

The best time to install the pick-up was at point of sale because they do not charge for shop labor at Dave’s when a new guitar is sold.

Dave’s had available the L.R. Baggs Anthem and Lyric pick-ups, but as I said earlier, my guitar guy J.R. was emphatic that the simplest, passive pick-up like the K&K Pure Mini would be the best choice to avoid sound balance and feedback issues. I was dubious at first but agreed. It was a quick install because the three transducers shown above simply glue onto the bridge plate within the guitar’s body. When I got home and plugged the guitar into my Fishman Loudbox Artist, the 0002H sounded very natural, so I was please that I followed J.R.’s advice.

Because the K&K Pure Mini is passive, it does not come with a pre-amp built into the installation, which is nice in that there are no added dials or buttons involved. While I like the Taylor Expression system, I was never a big fan of the rubbery dial/buttons protruding from the guitars body. On the other hand, without a pre-amp the ability to tone shape your guitar’s output is absent which could be a problem when interacting with a PA out around town.

To remedy this situation, I acquired an L.R. Baggs Venue DI/Pre-amp/Tuner. It’s a very nice portable device capable of precise tone shaping. I used it during a recent gig along with the Bose L1 Pro 32 PA and it worked just fine. The additional Notch filter for dialing out feedback frequencies is very cool and works great.

If you’d like to learn more about the L.R. Baggs Venue/DI and to listen to sound samples from my 0002H, I suggest you click on the link to another one of my blog articles below. The sound samples are at the bottom of the entry.

On Building a Pedalboard for My Acoustic Guitars

October 6, 2020October 6, 2020

Climbing out of the rabbit hole… I compare my National Resonator set-up with a traditional wooden biscuit vs. the new Revolution Biscuit…

Last week I posted a blog entry in which I compared video recordings of me playing my National Reso-rocket WB with the new Revolution Biscuit/Bridge, with and without the addition of a wooden gasket that sits between the biscuit and the resonator cone. The posting can be found here…

As I usually do, I shared my blog posting on my Facebook page, as well as a few other FB guitar enthusiast pages, including one dedicated to National Guitars users/fans. Sharing on Facebook gets my entries better exposure… in fact, people from all over the world have checked in to what I have to say and I am grateful for the time people take to read my articles and to comment on them.

My previous two articles about the Revolution biscuit received quite a bit of attention, but none more so than the most recent one. In fact there was quite a bit of consternation and dissatisfaction about how the guitar sounded with the Revolution biscuit, either with or without the wooden gasket. Someone suggested that the guitar strings may to too light… in fact, they’re quite heavy. There was even a bit of mysticism, one commenter suggesting that the installation of a Revolution Biscuit in a friend’s guitar removed its ghost, thus diminishing its sound quality. Another implied that perhaps my playing was at fault, which may be true, but I think the dominant variable was the Revolution Biscuit itself.

Reso-rocket WB, cone and biscuit removed…

I decided then that it might be useful to explore more closely a before and after comparison of the traditional wooden biscuit versus the Revolution biscuit. I had not done this before. The only other comparison that I am aware of that is publicly available is the one created by Steve James in his workshop, which you can find in this posting. It was hard for me to tell much difference between set-ups in James’s posting.

So, to respond to the sound critics I decided to do my own A/B comparison on the same exact guitar. I recorded myself playing first with the Revolution Biscuit (with wooden gasket deployed), then I disemboweled the guitar and reinstalled the original wooden biscuit and recorded the same tune again. The transition of one to the other was made easier because each biscuit was equipped with its own cone. If you’re interested in my recording technique you can find that information here. I recorded myself playing Muddy Waters’ tune I Feel Like Going Home, which I learned from Tom Feldmann’s excellent Guitar Workshop DVD. The guitar is tuned to Open G and I am using a heavy, solid brass Tone Dome slide.

Well… here are the two recordings:

First, the recording with the Revolution Biscuit installed:

Second, the recording with the tradition wooden biscuit re-installed on the guitar:

After completing the recordings and editing them a bit on my MacBook Pro with iMovie, I did some intense comparisons… I listened, comparing section by section of the tune, on my MacBook speakers, then through some nice Grado headphones, and finally piped it through my very nice Marantz/Paradigm sound system using Apple AirPlay. I also had my wife Annette and my Iowa-all-time-best-friend Grant listen to the recordings too and share their impressions with me.

In sum, everyone, including me liked the traditional wooden biscuit sound far more than the Revolution biscuit. The sonic and tonal differences were quite obvious. I am not particularly articulate when it comes down to discussing guitar tones, but I will try. The traditional wooden biscuit tones were more present, more naturally acoustic sounding, perhaps more resonator twangy sounding. The Revolution biscuit tones sounded more truncated, lacking tonal subtleties, and were flatter and more compressed sounding, with the compression increasing as the strings got heavier.

I’ve decided to climb out of the Revolution Biscuit rabbit hole and leave the wooden biscuit installed on my WB for the time being…

In conclusion:

I was persuaded to try the Revolution Biscuit because it would allow me to improve my set-up in terms of playing action. My strings were a bit too high for comfortable finger-style playing. One of the key selling points of the Revolution Biscuit is the easy raising and lowering of the saddle using set screws to adjust the guitar’s action. Plus it was cool looking… I like the high-tech machined aluminum appearance of the new biscuit… To state the obvious, how a guitar looks is very important, but not near as important as it sounds…
I did not expect a noticeable or negative tonal difference when replacing the wood biscuit, based largely on Steve James’s recording, but detected some immediate difference. Not doing an A/B comparison initially, I was not sure how much difference there really was and at that point I was too lazy to switch back and forth… it was a lot of somewhat stressful work setting up the Revolution biscuit the first time…
Later, I accepted Steve James’s offer to try out the wooden gasket that sits between the Revolution Bridge and the cone mostly because I wanted to see if it would alter the tonal qualities in a positive way. There was some change in tone (positive I think) which I reported on earlier.
In response to “sound critics” on Facebook, I finally did an A/B comparison of the two biscuits and as I perceive the results, the wooden biscuit is more natural sounding.
Caveat: in another lifetime, I was a statistician (having minored in the subject) during my doctoral studies. My conclusions about the Revolution Biscuit are probably best applied for the National Reso-rocket WB… this was not an extensive factorial analysis… there may be other important variables at play such as saddle-type (i.e. wood) and guitar type (i.e. metal vs wood body or size) that may interact and cause noticeably different results!

Please let me know what you think…

August 18, 2020

Nehemiah…

The soundtrack from the Coen Brother’s film O Brother, Where Art Thou? is one of my longtime favorites in my CD collection… I practically wore the bits and bytes off the disc it was played so many times… The film was great too… The tunes on the soundtrack are a broad sampling of old time American music, mostly sung by contemporary musicians… My favorite recording was an old country blues tune performed by Chris Thomas King… it was a haunting rendition and I searched King’s other recordings to find more tunes just like the one he sang; however, I did not have very good luck and gave up… most of his other body of work was very different, so far as I could tell…

It wasn’t until just this summer 2020 that I tumbled onto what Chris Thomas King was singing in the film. I had the great good fortune to take a few online guitar lessons with a highly accomplished performing musician/recording artist and he pushed me, after hearing some of my video recordings, to listen more closely to the original tunes that I was playing and listed several 8 bar blues tunes as starter examples, one of which was a Skip James tune called Crow Jane. Suddenly, I remembered reading about Skip James in Zeke Schein’s excellent book, Portrait of a Phantom. Schein’s book actually inspired me to dig deeper into roots music and I eventually committed to learning and playing country blues. Back at the time of reading Schein’s book the connection of Skip James to O Brother! went completely over my head, other than to note that Schein had a very high regard for the musician, and that he was somewhat obscure except to country blues aficionados.

After purchasing and listening to a Skip James CD to study Crow Jane, it finally occurred to me that Chris Thomas King was playing a Skip James tune in O Brother! I was awestruck by James’s precision finger-style guitar playing and his haunting and unique, for that genre, falsetto voice. It was at that point that I decided to try to learn to play some Skip James tunes, which I thought might be difficult but would be a great summer challenge!

click on image for link to Guitar Workshop

Having had excellent experience with DVD lessons sold on Stefan Grossman’s Guitar Workshop website, I went shopping for Skip James material and found this wonderful set of lessons including tabbed tunes of some of James’s most memorable tunes. Similar to the way in which Grossman teaches a tune, Tom Feldmann breaks down the song section by section and then plays it slowly with a split screen showing both hands in action. This approach works great for me.

Nehemiah Curtis “Skip” James, was born in the very early 1900’s in Bentonia, Mississippi, and died after a lengthy battle with cancer the year I graduated high school in 1969. For the most part, he was obscure much of his life and today is barely mentioned in books about country blues in comparison to other genre musicians like Lonnie Johnson or Blind Lemon Jefferson. He recorded a few sides in the early 1900’s and drew some notice, but the depression of the 1930’s drove him into obscurity, so he quit performing and entered into the ministry. Years later while languishing in a hospital room, dealing with the onset of cancer, he was discovered by country blues aficionado John Fahey, and in 1964 Fahey brought him to the public’s attention at venues such as the Newport Folk Festival. As a result, he was re-recorded so there are two sets of James recordings that can be found either from his early days or later in the 1960’s. Below you can listen to an early recording of Hard Times Killing Floor Blues, the tune that initially beguiled me when I saw O Brother!

According to the introduction of my Guitar Workshop DVD, Tom Feldmann explains that James wrote and played songs in standard tuning (EADGBE) and also in what’s referred to as Cross-tuning or D Minor tuning (DADFAD) which is somewhat similar to Open D/Vastapol tuning except the F# string is flatted to F. I like D Minor tuning and the somewhat unusual haunting tone it creates. I currently have my Taylor 914ce tuned to D Minor all of the time.

Well, I dove right into Skip James tunes. I began with the standard tuned 8 bar, Crow Jane, although my tabbed transcription varies from 8 to eleven bars from verse to verse depending on how James played it when he recorded. The source of Crow Jane is unknown; however, it is believed to have emanated originally in the Piedmont region of Virginia, North and South Carolina. My online teacher found James’s approach “crooked” because of the verse/bar variation, and it annoyed him as well as my use Feldmann’s tablature, which actually ended with us parting ways, even though I liked him a lot. Below you can see my rendering of a few versus of Crow Jane on my Taylor 812ce piped through a Fishman Artist amp, some compression, octaver, and reverb.

There are country blues fans who believe that the tunes should ONLY be played on acoustic guitars, which, in truth, has never constrained me. I like playing the tunes on both acoustic and electric platforms. Occasionally, I have a posting kicked off a FaceBook group for violating that sanctity, but if it was good enough for Muddy Waters, it’s good enough for me. So in that regard below I am posting a more complete version of Crow Jane played on my Taylor T3z acoustic/electric hybrid piped through a Mesa Boogie Filmont 50 amplifier on a clean channel, and pedal effects including octaver, compression, tremolo, delay, and reverb:

I will note that for me, a tune, is a work in progress for weeks, months, and even years until I have it nailed down to where I am totally happy with its rendering. I will also point out the obvious that I choose not to sing these tunes, though there are lyrics for them. To quote Stefan Grossman, “I am a guitar player, not a singer.” Consequently, the tunes I choose to play must stand on their own as instrumentals, at least in my judgement. My James tunes are early in the process, but I have them functional enough and absolutely love playing them. After getting Crow Jane through its initial paces I moved onto a the D Minor tuning, Hard Time Killing Floor Blues, the tune that initially attracted me to James’s work.

There are a few other James tunes that sound good as instrumentals that I intend to add to my repertoire in the future. In fact, I am currently working on another D Minor tune Four O’Clock Blues… until then, thanks for looking in… comments are welcome…

Tag: acoustic guitar

I Swap Out a Larger Irish Guitar for a Smaller More Comfortable One… I Review the Lowden S-50

Like this:

An Irish Guitar Joins the Stable – I Review My Lowden F-50

Like this:

Reviewing the Collings 0002H: Acoustic Guitar as Industrial Art

Like this:

Climbing out of the rabbit hole… I compare my National Resonator set-up with a traditional wooden biscuit vs. the new Revolution Biscuit…

Like this:

Nehemiah…

Like this:

Share this:

Like this:

Share this:

Like this:

Share this:

Like this:

Share this:

Like this:

Share this:

Like this: